Question 1

What is the SATA Cold Chisel and what is it used for?

Accepted Answer

The SATA Cold Chisel is a single-piece forged steel tool with a 20 mm blade width designed for chiseling away metal, stone, and other hard materials. It’s built for durability in heavy-duty cutting and shaping tasks.

Question 2

What are the key specifications of the SATA Cold Chisel?

Accepted Answer

Blade width: 20 mm. Material: forged steel (Cr-V variant). Finishes: chrome plated (SC90782 and SC90783) or powder coated (SC90784, SC90785, SC90786) to resist corrosion. The edge is heat treated for long-lasting durability and a precise ground edge for clean cuts.

Question 3

What’s the difference between the chrome-plated variants and the powder-coated variants?

Accepted Answer

Chrome-plated variants SC90782 and SC90783 are optimized for corrosion resistance and a bright finish, while powder-coated variants SC90784, SC90785, and SC90786 use a durable coating that can resist chips and wear in tougher environments.

Question 4

What materials can I cut or chip with this chisel?

Accepted Answer

With a robust 20 mm blade and a hardened edge, it’s suitable for shaping and removing material from metal, stone, and other hard surfaces commonly encountered in metalworking and masonry tasks.

Question 5

How should I use and maintain the SATA Cold Chisel for longevity?

Accepted Answer

Grip the chisel firmly, position it squarely to the workpiece, and strike with an appropriate hammer weight to avoid glancing blows. Regularly inspect the edge for nicks, keep the edge clean, and store in a dry place to prevent corrosion; use the chrome-plated or powder-coated finish as appropriate for your environment.

Question 6

What safety steps should I follow when using this chisel?

Accepted Answer

Wear eye protection and gloves, secure the workpiece, stand with a stable stance, and ensure you’re striking squarely to avoid glancing blows. Keep hands and fingers away from the striking path and never strike the chisel with a dull or damaged edge.

Question 7

How does this SATA cold chisel compare to other chisels on Fepy?

Accepted Answer

For alternative options on Fepy, you can also consider the 18 mm SATA Cold Chisel (https://fepy.com/product/sata-cold-chisel-18mm) and the 25 mm SATA Cold Chisel (https://fepy.com/product/sata-cold-chisel-25mm). These offer different blade widths to match varying workloads while maintaining SATA’s forged steel construction and durability.

Question 8

What are common use cases or projects for this chisel?

Accepted Answer

Ideal for metal fabrication tasks like removing welds or material from metal surfaces, shaping stone, or preparing surfaces for further work. It’s well-suited for workshops, fabrication shops, and DIY metal/stone projects requiring a robust, durable chisel.

Question 9

Will this chisel work with standard hammers and setups?

Accepted Answer

Yes. It is designed to be used with standard workshop hammers. Ensure you choose a hammer weight appropriate for the task to maintain control and edge integrity while delivering solid, controlled blows.

Question 10

How can I keep the chisel’s edge sharp and when should I re-sharpen?

Accepted Answer

The finely ground edge helps maintain sharpness longer under heavy use. Regularly inspect for dullness or chips; re-sharpen or re-define the edge as needed using appropriate sharpening tools for steel chisels to maintain an accurate, clean edge.

Question 11

Why might the SATA Cold Chisel be a good value choice?

Accepted Answer

Its forged steel construction, heat-treated edge, and choice of chrome-plated or powder-coated finishes provide durability and corrosion resistance, contributing to longer tool life and more reliable performance in demanding conditions.

Question 12

How should I choose between the different SATA chisel sizes and finishes?

Accepted Answer

Consider your typical project material and thickness. For metal-focused work or thicker material, the 20 mm blade offers a robust edge. If your environment demands extra corrosion resistance, choose chrome plating; for heavy-duty wear resistance, a powder-coated finish may be preferable. If you’re unsure, compare the 18 mm and 25 mm alternatives to match your workload (see product links above).

إزميل العمل على البارد ساتا قياس (18mm) موديل (SC90783)

Features & Benefits

Specification

Attachments

Frequently Asked Questions