Features

• Self-adhesive, cold applied, and simple to apply
• Excellent adhesive for horizontal and vertical surfaces
• Phenomenal protection from sulfates, chlorides, acids, dilute alkalis
• Good puncture and tear resistance
• Vapour and waterproof.

Application Details

Peel off the release membrane from the self-adhesive side and begin unrolling the membrane and press it to the surface. Smoothen the film from the middle to the edges with a wooden press to eliminate any entrapped air. Moreover, an iron roller will be utilized for moving on top of the applied film to guarantee an appropriate and solid grip of the bitumen compound with the base surface. Side overlaps will be at least 50mm on the selvedge and the end overlaps 100mm.

Surface preparation

The surface shall be cleaned thoroughly of all contamination like traces of curing compound, dust, grease and oil. All surface imperfections, structurally unsound, protrusions and friable concrete must be repaired with a suitable Polycrates concrete repair mortar which boosts the adhesion between the membrane and the concrete surface. Moreover, the primer also acts as an adhesive for the dust which gets collected on the surface even after cleaning.

SPECIFICATIONS