|Brands :||National Paints|
|Quantity Unit :||DRUM|
|Item Type :||Guard Epoxy Flooring|
|Application Type :||Interior & Exterior|
About this item
A two-pack topcoat chemical resistant National Guard paint is based on polyamide cured epoxy resin for cemented floors. The Guard Epoxy paint is a fully cured film with excellent adhesion to concrete surfaces. It is also a perfect water-resistant adhesive paint. It has a great flow and is waterproof to spillage and splash of mild solvents and chemical substances. It is an Impact Resistance Paint and is good abrasion. It provides an easy clean surface.
The general use of National Guard Epoxy paints is for concrete surfaces. It can be utilized with suggested size aggregates and lightweight flooring applications. Guard Epoxy paint could be applied by roller, spray and brush.
New Construction: The concrete floors should be cured for at least 28 days before coating Guard Epoxy. The dampness content ought to be under 5%. The surface should be free from grease and oil, spotless from dust, loose particle, etc. For thoroughly cleaning the laitance, ensure the use of mechanical devices like the Vaccum Recovery Shot Blasting machine.
All tainting should be cleared, and the sound of the spotless substrate should be visible. Before applying the National Guard Epoxy Flooring Topcoat, a mechanical cleaning method should be used for removing all dust particles and debris from the surface. Ensure to repair all minor cracks and damaged surfaces. Allow the surface to dry before applying the primer thoroughly.
The Guard Epoxy paint furnishes a strong bond, protection from moisture and mild chemical substances. The National Paints are easy to clean, impact-resistant and maintain good flow abrasion to the surface.
|COLOUR, DRY FILM||Limited pastel shade colors.|
|FINISH, DRY FILM||Smooth / Glossy, (Matt on request) Clear / Glossy|
|VOLUME SOLIDS||55 ± 2% 40 ± 2% (ASTM D2697)|
|SPECIFIC GRAVITY||1.40 ± 0.05 (mixed) colour 1.00 ± 0.05 (of mixed)|
|THEORETICAL SPREADING||11 - 5.5 M2/LTR 10 - 8 M2/LTR|
|RECOMMENDED DFT (DRY FILM)||50 - 100 Microns/Coat 40 - 50 Microns/Coat|
|RECOMMENDED WFT (WET FILM)||90 - 180 Microns/Coat 100 - 125 Microns/Coat|
|TOUCH DRY||3 - 6 hours|
|*DRY TO RECOAT / OVERCOAT||12 hours (minimum) - 72 hours (maximum)|
|FULLY CURED||7 days|
|APPLICATION METHOD||Roller, Brush or Spray|
|CLEANING/THINNING||National Epoxy Thinner|
|THINNER (VOLUME)||5 - 10% depending on the method of application CONV. SPRAY REQUIREMENTS|
AIRLESS SPRAY REQUIREMENTS
|NOZZLE SIZE||0.018″ - 0.020″|
|MIXING RATIO (BY VOLUME)||Base Hardener 4 1 (Mix thoroughly keep for 15 - 20 minutes before use.)|
|POT LIFE @ 30ºc (100 ml)||6 - 8 hours|
|Item Type||Guard Epoxy Flooring|
|Application Type||Interior & Exterior|
Arrives: Sep 23