Asian Paints Berger 18L Stucco Filler - White

Asian Paints Berger Stucco Filler is a co-polymer based filler. It is designed to be fast-drying and effective in filling surface irregularities and indentations.

The key benefits include its ability to evenly produce a smooth surface, fast-drying properties, and suitability for filling holes and cracks. It also helps in improving the overall appearance of the wall by creating a uniform base for painting.

Generally, a primer is not required after applying stucco fillers like this one, as they can be directly overcoated with interior or exterior emulsions. However, specific conditions may necessitate the use of a primer for better adhesion or finish.

The Asian Paints Berger Stucco Filler comes in an 18-liter capacity, making it suitable for projects of various sizes.

Asian Paints Berger Stucco Filler can be applied to concrete and plaster surfaces. It is designed to adhere well to these substrates, providing a smooth finish.

While specific safety precautions for this product are not detailed, general safety measures include wearing protective gear like gloves and safety glasses. Ensure good ventilation and avoid inhaling dust during application.

Asian Paints Berger Stucco Filler is a water-based putty designed to fill cracks, dents, and imperfections in masonry surfaces. It can be used on both interior and exterior walls to create a smooth, level surface that is ready for painting.

Start with a clean, dry surface. Stir the filler to a creamy consistency and add a small amount of water if needed to reach a smooth paste. Apply with a putty knife or trowel, pressing into holes or cracks and smoothing flush with the wall. Let it dry, lightly sand for a fine finish, then prime before painting.

It is suitable for masonry surfaces such as plaster, concrete, and cement renders, and works for both interior and exterior walls.

Yes. It is formulated to fill cracks, dents, joints, and uneven areas, helping to level the surface before painting.

It dries to the touch in a few hours, with full cure depending on thickness and climate. After it dries, you can sand the surface and apply primer and paint once the area is firm.

Yes, it accepts paint. It is available in a range of colors to match common wall shades and can be tinted to achieve closer color matching.

Yes. Once fully dry, you can sand the surface to achieve a smooth finish before priming and painting.

Being water-based, it has low odor and is suitable for indoor use. Wear gloves, ensure good ventilation, and avoid prolonged skin contact.