Funbo Foam Board, 50 × 70 cm, 0.5 cm, Lightweight, Easy-Cut, Smooth Paper Surface, Ideal for Mounting, Models & Craft Displays, Red - Pack of 5

Size: 50 × 70 cm; Thickness: 5 mm; Colour: Event-bright red; Pack: 5 boards; Core: rigid 5 mm; Facings: clay-coated paper for bright, even colour; Surface: ultra-smooth for vinyl, ink, and stencils; Cutting: knife-clean cuts; Adhesion: bonds well with spray adhesive and tape runners.

The board works well with spray adhesives and tape runners and accepts vinyl, ink, and printed materials, making it suitable for signs, displays, and mounting projects.

Use a sharp craft knife and a straightedge. Cut slowly along the straight edge to achieve neat, knife-clean edges; the 5 mm core supports crisp trimming.

Yes. The ultra-smooth faces support permanent markers and vinyl well, with the vivid red surface providing strong contrast for signage and artwork.

Ideal for mounting photos and prints, creating signs and model panels, classroom displays, posters, and craft dioramas or display boards.

Store flat in a cool, dry place away from direct heat or moisture. If stacking multiple boards, use spacers to avoid warping; handle gently to prevent dents.

The event-bright red surface is designed for indoor visibility and color vibrancy. For best results, avoid prolonged direct sunlight and high humidity, which can fade colors over time.

Spray adhesives and tape runners are recommended for best adhesion on the ultra-smooth surface. Test on a small area first and apply evenly to prevent warping.

The 5 mm thickness provides greater rigidity and a sturdier mounting surface compared with thinner boards. For context, see Funbo White Foam Board 50x70 cm, 5 mm (https://fepy.com/product/funbo-foam-board-50x70-white-5mm-pack-5) and Funbo Red Foam Board 50x70 cm, 3 mm (https://fepy.com/product/funbo-foam-board-50x70-red-3mm-pack-5).

The board has a rigid and lightweight 5 mm core, providing structural strength while remaining easy to handle and cut.

Plan your layout before cutting, cut with a straightedge for accuracy, apply adhesive to the back of the board or to the mounting surface, press firmly to avoid air pockets, and allow adhesive to set before display.