Name: 0.35MM X 3M GI Wall Angle
Brand: Fepy
SKU: 28141-NOS
Price: 3.50 AED
Availability: InStock

Question 1

What is the 0.35MM X 3M GI Wall Angle used for?

Accepted Answer

The 0.35mm thick GI Wall Angle is a galvanized iron angle piece used for light framing, bracing, trim, and edge detailing in construction. With a 3 meter length, it is suitable for both home and commercial projects where sturdy corner support or mounting surfaces are needed.

Question 2

What are the main specifications of this GI Wall Angle?

Accepted Answer

Key specs are 0.35 mm thickness, 3 m length, material is galvanized iron, and it is described as corrosion resistant and capable of withstanding extreme weather. The product is said to be fire resistant, easy to cut and shape, and available in various sizes and finishes.

Question 3

What alternatives to this product are available on Fepy.com and how do they compare?

Accepted Answer

Alternative GI wall angles on Fepy.com include: 0.5 mm X 3 m GI Wall Angle (https://fepy.com/product/gi-wall-angle-0-5mm-3m) which offers greater thickness for heavier loads; 0.35 mm X 2 m GI Wall Angle (https://fepy.com/product/gi-wall-angle-0-35mm-2m) for shorter projects with similar thickness; and 0.3 mm X 3 m GI Wall Angle (https://fepy.com/product/gi-wall-angle-0-3mm-3m) as a lighter option. These provide different lengths and thicknesses to fit varying applications and budgets.

Question 4

What projects is this GI wall angle best suited for?

Accepted Answer

This wall angle is well suited for DIY home improvements, shelving frames, lightweight partitions, mounting brackets, and general framing where a sturdy right-angle support is needed without heavy load requirements.

Question 5

How do I install or cut this wall angle?

Accepted Answer

To install, measure and mark the required length, cut to size using metal shears or tin snips, deburr any sharp edges, and position the angle where needed. Secure with appropriate screws or fasteners for the substrate, ensuring a clean, straight alignment before final tightening.

Question 6

What safety steps should I follow when handling and installing this?

Accepted Answer

Wear gloves and eye protection when cutting or handling to avoid sharp edges. Work in a well-ventilated area, keep the material dry to prevent corrosion at damaged coatings, and use proper fasteners that are suitable for the substrate. Handle sheets with care to prevent injuries.

Question 7

What maintenance or durability should I expect from this GI wall angle?

Accepted Answer

The galvanized coating provides corrosion resistance for outdoor or humid environments. Regular cleaning with mild soap and water helps maintain appearance. If the coating becomes damaged, consider touching up or replacing the affected section to prevent corrosion.

Question 8

Is this product compliant with standard building codes for typical light-duty applications?

Accepted Answer

This product is commonly used for light framing and bracing in non-structural or semi-structural applications. For critical structural needs or local code requirements, consult your local regulations and use appropriate standards and fasteners.

Question 9

How does the price compare to alternatives in terms of value?

Accepted Answer

The 0.35 mm wall angle is presented as a cost-effective option with easy handling and long service life due to its galvanized coating. When choosing between thicknesses and lengths, consider the load and project requirements to determine overall value for your specific application.

Question 10

Can this product be customized or are there other sizes available?

Accepted Answer

Yes, similar products are offered in different thicknesses and lengths. Availability of specific sizes and finishes varies, so you can select the option that best fits your project needs.

Question 11

How should I store this GI wall angle when not in use?

Accepted Answer

Store in a dry, covered area to protect the coating from moisture. Keep the pieces flat or neatly stacked to prevent bending or damage, and avoid placing heavy objects on top of the metal edges.

0.35MM X 3M GI Wall Angle

Features & Benefits

Specification

Attachments

Frequently Asked Questions