1/2" DRIVE 6 POINT IMPACT DEEP SOCKET 30MM ST34423SC SATA

A 6-point (hex) interior provides better grip on hex fasteners and reduces rounding. A deep socket offers extended reach to access fasteners that sit deeper or are recessed, making it ideal for certain automotive and machinery applications.

Key specs: drive size = 1/2 inch; socket size = 30 mm (across hex flats); type = deep socket; points = 6; brand = SATA; model = ST34423SC; intended for impact tool use.

Yes. It is built for use with 1/2 inch drive impact wrenches and impact-rated adapters, providing durability under high torque and shock.

Attach the socket to the 1/2 inch drive on your impact wrench, ensure it seats fully on the fastener, and apply steady torque. Do not strike the socket with a hammer and avoid using non-impact tools that aren’t rated for impact use.

Common uses include automotive work (e.g., suspension or engine components), heavy machinery maintenance, and any task requiring deep reach to access recessed hex fasteners with a 30 mm size.

Measure the hex size across the flats of the fastener. If it measures 30 mm, this socket is the correct size. If not, you’ll want the corresponding 27 mm, 28 mm, 32 mm, etc., size from your available options.

Other sizes you might consider include 28 mm, 27 mm, and 32 mm deep sockets. Examples (product pages on Fepy.com): 28 mm: https://fepy.com/products/st34428sc-sata-28mm-12-drive-deep-socket; 27 mm: https://fepy.com/products/st34427sc-sata-27mm-12-drive-deep-socket; 32 mm: https://fepy.com/products/st34432sc-sata-32mm-12-drive-deep-socket.

Keep it clean and dry after use, store in a protective case or pouch to prevent corrosion, inspect for cracks or wear before use, and ensure it is used only with compatible impact tools to avoid overstress.

Always wear eye protection, use rated PPE, ensure the socket is properly seated on the fastener and the wrench, avoid exceeding the tool’s torque limits, and keep hands and body clear of the impact area during operation.

This socket is typically sold individually and is positioned as a durable, high-visibility option for 30 mm hex fasteners in demanding applications, offering direct replacement compatibility with 1/2 inch drive setups.

It is designed for impact use and is best paired with an impact wrench or impact-rated tool. Using it with non-impact drivers is not recommended, as it may reduce performance and shorten socket life.