SATA GL25806 1/2" Drive Long Triple Square Bit Socket M14

High-strength steel construction, chrome finish for corrosion resistance, heat-treated for durability, extended length for reach, 1/2" drive compatibility, laser-etched permanent size markings for quick identification, and an impact-resistant design for use with power tools.

The socket is M14 size and is designed for a 1/2" drive ratchet or torque wrench.

The longer length lets you access bolts buried deep in engines, machinery, or frames that standard-length sockets cannot reach.

Yes, it features impact-resistant construction and is designed to handle high torque when used with appropriate power tools; ensure proper engagement and follow tool guidelines.

Attach the socket to a 1/2" drive ratchet or torque wrench, ensure the M14 bit engages the fastener fully, apply steady force without side loading, and loosen or tighten as needed. Store after use.

The size is laser-etched on the socket for permanent readability, so it won’t rub off with use.

Use the correct size to prevent rounding, avoid over-torquing, inspect for damage before use, keep hands clear of the fastener, and use eye protection in busy work environments.

If you’re choosing between sizes, consider the following long 1/2" drive triple-square sockets on Fepy: - SATA GL25804 1/2" Drive Long Triple Square Socket M12: https://fepy.com/product/sata-gl25804-12-drive-long-triple-square-bit-socket-m12 - SATA GL25807 1/2" Drive Long Triple Square Socket M16: https://fepy.com/product/sata-gl25807-12-drive-long-triple-square-bit-socket-m16

Wipe the socket clean after use, lightly lubricate to prevent rust, avoid dropping or striking the socket against hard surfaces, and store in a dry area.

Automotive work (engine bays, transmission components), heavy machinery maintenance, and any job requiring deep access to M14 triple-square fasteners in recessed or hard-to-reach locations.

Fepy offers other sizes in the same long-drive triple-square family; it’s worth checking whether you need M12 or M16 variants for your project.