10mm GI D Shackle

Key specs: 10mm size (pin diameter), D‑shape, high‑grade steel, zinc‑plated finish for corrosion resistance. It’s built for secure fastening and versatile use across different applications.

Zinc plating provides a protective layer that helps guard the steel against rust and corrosion, especially in outdoor, damp, or humid environments, extending the life of the shackle.

Common uses include securing cables or ropes, creating anchor points, rigging setups, towing applications, tie‑downs, and other secure fastening tasks where a strong, reliable connection is needed.

To install, insert the pin through the connection points along the load path, then tighten the pin fully. Always keep the load aligned with the shackle body (avoid side loading) and ensure the pin is secure and not cross‑threaded.

Choose 10mm for heavier or thicker loads where more strength is needed than an 8mm shackle, but lighter than a 12mm option. For precise suitability, compare the load requirements and dimensions of each size on Fepy’s product pages.

The 10mm version offers greater strength and load capacity than the 8mm. See the 8mm GI D Shackle here: https://fepy.com/product/8mm-gi-d-shackle

The 12mm version provides higher strength and load capacity than the 10mm. See the 12mm GI D Shackle here: https://fepy.com/product/12mm-gi-d-shackle

The GI (galvanised) version offers good corrosion resistance at a lower cost, suitable for most outdoor tasks. Stainless steel typically provides superior corrosion resistance in saltwater or highly corrosive environments, but at a higher price. See a 10mm Stainless Steel D Shackle here: https://fepy.com/product/10mm-stainless-steel-d-shackle

Yes, the galvanised finish provides corrosion resistance that suits outdoor use and many marine applications. For prolonged exposure to saltwater or highly corrosive conditions, inspect regularly and replace if any signs of wear appear.

Regularly inspect for deformation, cracks, or excessive wear. Keep the shackle clean and dry when not in use, avoid exposing it to corrosive substances, and replace if any damage is detected. Store in a dry place to maximize longevity.

Always load the shackle along its axis (avoid side loading), use the correct size for the task, ensure the pin is fully seated and secure, and inspect for damage before use. Do not exceed the recommended handling practices for rigging and load securing.