16mm X 100mm GI Bolt

Key specs: diameter 16 mm, length 100 mm, thread length 100 mm, thread pitch 1.5 mm, material galvanized steel, hex head, finish galvanized. These features deliver a strong, corrosion-resistant fastener suitable for general-purpose anchoring.

It can be used to fasten or anchor across a variety of materials, including wood, metal, and concrete, when paired with matching nuts and washers. For concrete or masonry use, combine with appropriate anchors or inserts designed for that substrate.

Installation steps: align the components, insert the bolt through the hole or part, thread on a compatible nut on the opposite side, and tighten until secure. For concrete or masonry, use a compatible anchor system and pre-drill as required. Always use a washer where needed and ensure the bolt (M16) fits the nut and washer you’re using.

Yes. The galvanized steel coating provides corrosion resistance, making it suitable for outdoor and wet environments when properly installed and maintained.

Ensure you’re using the correct nut and washer size for an M16 bolt, avoid over-tightening to prevent thread damage, use personal protective equipment as needed, and verify the load requirements of your application to prevent failure.

For similar fasteners on Fepy, you can consider: GI Bolt 16mm x 120mm (https://fepy.com/product/gi-bolt-16mm-120mm) which offers extra bite length; GI Bolt 12mm x 100mm (https://fepy.com/product/gi-bolt-12mm-100mm) for lighter-duty applications; and Zinc Plated Hex Bolt 16mm x 100mm (https://fepy.com/product/zinc-hex-bolt-16mm-100mm) which provides a different finish. Each option serves different load needs and environments.

Use cases include mounting brackets and fixtures to wood or metal, securing structural supports, anchoring rails or fences, attaching hardware to decks, and general-purpose fastening where a strong 16 mm bolt is appropriate.

Pair with matching M16 nuts and washers (preferably galvanized or stainless in outdoor environments). If used in masonry, also consider appropriate anchors or inserts. For added security in outdoor settings, stainless nuts/washers are a good option.

Confirm the hole diameter is compatible with a 16 mm bolt, the available length is sufficient for your joined parts (100 mm thread length matches the bolt length), and that the anticipated load aligns with the bolt’s strength. Check that you’re using the correct nut and washer for an M16 bolt assembly.

Its galvanized steel construction provides durable, corrosion-resistant performance at a reasonable price. The 16 mm diameter and 100 mm length cover a wide range of common anchoring needs, making it a versatile and cost-effective choice for many projects.