1m x 35m White Fiber Mesh

Specifications include a width of 1 meter, a length of 35 meters, white color for a clean appearance, fiber reinforcement construction for strength and flexibility, UV resistance for outdoor exposure, and its lightweight, easy-to-handle nature to speed up installation.

Fiber mesh distributes stresses across the surface and bridges tiny cracks as the material cures, reducing the risk of crack propagation. This results in improved crack resistance and greater durability without the need for heavy metal meshes in some applications.

It’s suitable for plaster, concrete, masonry, cement boards, and stucco. It can be used on interior and exterior surfaces where crack control and reinforced strength are beneficial.

Plan and cut the mesh to fit the project area, lay or embed it into the first coat of plaster or mortar, ensure full adhesion, and overlap joints where needed. Finish with a subsequent coat to encapsulate the mesh for a smooth, even surface.

You’ll typically need scissors or a utility knife to cut the mesh, measuring tools, a trowel or margin trowel, plaster or cement mix, adhesive if required, and PPE such as gloves and safety goggles during handling.

Yes. Wear gloves and eye protection to prevent skin irritation or eye injury from edges. Work in a clean area to avoid loose fibers becoming airborne, and wash exposed skin after handling.

Yes, the product is UV-resistant, helping it maintain integrity and appearance when exposed to sunlight over time, making it suitable for exterior applications as well as indoor use.

The mesh covers 35 square meters in one continuous sheet (1 m width × 35 m length). Consider overlaps at joints and any waste when calculating the required length for your project; plan extra material for cuts and fitment.

Ideal for reinforcing plaster and cement-based coatings on walls, ceilings, and floors, reducing crack likelihood in large or crack-prone surfaces, and improving durability on exterior stucco or masonry projects.

For similar reinforcement needs, you can compare with these alternatives on Fepy.com: 1) 1m x 30m White Fiber Mesh at https://fepy.com/product/1m-x-30m-white-fiber-mesh 2) 1m x 50m White Fiber Mesh at https://fepy.com/product/1m-x-50m-white-fiber-mesh 3) Fiberglass Reinforcement Mesh for Concrete 1m x 40m at https://fepy.com/product/fiberglass-reinforcement-mesh-concrete-1m-x-40m. These options vary in length to suit different project sizes and overlap needs.

Yes. Cut to fit the area, embed or lay into the first coat of plaster or mortar, overlap joints adequately, ensure complete adhesion before applying the final coat, and follow standard curing times for the plaster or concrete mix used. Always accommodate overlaps and avoid gaps where crack paths might form.