210195-3-BALL BEARING 6201DDW FOR GA7090 MAKITA

6201 refers to the bearing size (12 mm bore, 32 mm outer diameter, 10 mm width). DDW indicates double shields (sealed on both sides) to help retain lubrication and keep contaminants out.

Key specs: bore 12 mm, outer diameter 32 mm, width 10 mm, double-shielded seals (DDW) on both sides, typically high‑grade chrome steel construction. These bearings are built for reliability in power tools like the GA7090.

This bearing is specified for GA7090 and similar tools that use a 12x32x10 mm 6201 family bearing. Always verify the shaft bore and housing fits before replacement.

Steps: (1) disconnect power and remove the accessory housing to access the spindle. (2) carefully remove the old bearing using a bearing puller if needed. (3) clean the seating surfaces. (4) align and press the new bearing straight in using a proper bearing driver or a press, applying even pressure to avoid cocking. (5) reassemble the tool and test for smooth rotation without play.

Recommended tools include a bearing puller or slide hammer, a bearing press or driver of the correct diameter, a rubber mallet for gentle tapping, and solvent/degreaser for cleaning. Use a torque wrench only if specified by the tool manual.

DDW bearings have shields on both sides, which helps retain lubricant longer and provides better contamination resistance in dusty environments often found in workshop settings.

Signs include unusual grinding or roughness during rotation, increased runout or wobble, audible clunking or grinding sounds, excess axial or radial play, or visible damage to the seals or race.

Maintain clean lubrication, avoid overloading the tool, replace bearings with the exact 12x32x10 size when needed, and keep the tool’s spindle and seating surfaces free of debris. Regular inspection helps catch wear before it impacts performance.

When comparing, consider bore/outer/width, seal type (DDW vs. single sealing or open), material quality, and price. For searches on Fepy, you’ll find compatible 12x32x10 bearings with differing seal configurations—choose the one that matches your tool’s seating and contamination exposure while balancing cost.

Alternative options on Fepy include other 12x32x10 bearings with similar fittings and different seal configurations. Example options you might see are 6201DDW variants and 6201-2RS variants. To review them, visit Fepy’s bearings catalog and search for 12x32x10 or 6201DDW bearings to compare specs and prices. Example alternatives on Fepy include: https://fepy.com/product/210196-3-ball-bearing-6201ddw-ga7090-makita and https://fepy.com/product/62012rs-ball-bearing-12x32x10