25MM X 25MM X 1.7MM X 6M MS Tube

Material: high grade steel; Cross section: 20 mm by 20 mm; Wall thickness: 1.5 mm; Length: 6 meters; Finish: hot-dip galvanized for corrosion resistance; Designed for heavy use and long-lasting performance.

It uses traditional welding and lapping techniques and is then hot-dip galvanized to protect against corrosion, delivering strong performance and extended life in various environments.

It is ideal for building furniture frames, garage or workshop racking, gym rigs, greenhouse frames, staircases, trolleys, kitchen fixtures, and other structural or framing applications that require a sturdy steel tube.

Measure accurately, cut with a suitable metal saw, and deburr the edges for a clean fit. Join using compatible square connectors, corner brackets, or end caps designed for 20x20 tubes to ensure solid, square joints.

Wear gloves and eye protection when cutting or handling. Watch for sharp edges after cutting and ensure connections are secure to prevent movement. Handle galvanization coatings with care and follow standard PPE guidelines during assembly.

Maintain its galvanized coating by keeping it clean and dry. Periodically inspect for dents or damaged areas and address promptly. For outdoor use, avoid prolonged contact with salts or chemicals that could compromise the coating.

If you are evaluating alternatives, you can compare against similar square tubes with different cross sections or wall thicknesses. For example, you might look at MS Tube 25x25 1.5 mm or MS Tube 20x20 1.2 mm to weigh strength, weight, and cost. See the related product pages at: https://fepy.com/product/ms-tube-25x25-1-5mm-steel-tube-galvanized-6m and https://fepy.com/product/ms-tube-20x20-1-2mm-steel-tube-galvanized-6m

Compatible corner brackets, end caps, and joint connectors designed for square steel tubes are ideal to create sturdy frames. Look for fittings rated for 20x20 tubes to ensure a proper fit and structural integrity.

The listing specifies a 6-meter length. You can typically cut steel tubes to the required size on-site with a metal saw. If you need shorter lengths, you may need to source cut-to-length options from the seller or plan to cut the 6 m tube yourself.

This MS Tube combines a robust 20x20 cross section with a 1.5 mm wall and hot-dip galvanization, delivering strong load-bearing capacity and excellent corrosion resistance. The 6-meter length minimizes joints for many projects, offering good value for durable, long-lasting use.

Hot-dip galvanization provides a durable protective coating that helps resist corrosion in indoor and outdoor settings. For specific regional standards, verify local codes and ensure proper handling, installation, and maintenance to meet your project requirements.