2mm Delta Leveling System Strip 100 Pcs/Pkt

A 2mm thickness sets a uniform gap between adjacent tiles, promoting a flat, even surface and a professional grout line appearance.

There are 100 strips per packet, which helps cover long runs and multiple rooms in larger tiling projects such as floors, walls, bathrooms, kitchens, or backsplashes.

They are suitable for ceramic, porcelain, and natural stone tiles.

Use the following steps: 1) Plan layout and mark joint positions. 2) Place a strip at each joint before laying the adjacent tile. 3) Press tiles to seat into the adhesive, keeping a 2mm gap. 4) Continue across the area, repeating as needed. 5) After the adhesive cures, remove the strips by gently prying/pulling along the joint, then grout the joints.

Once the adhesive is set, carefully remove strips by gently prying or pulling them out along the joint. Take care not to move or chip adjacent tiles. If needed, use a small tool to assist, then proceed with grouting.

Yes. They’re designed to be non-marring, minimizing the risk of scratching or damaging tile surfaces during insertion and removal, and they’re lightweight and user-friendly for DIY tiling.

Compared to thinner or thicker options, the 2mm strip provides a medium grout joint width. For tighter joints, you might choose a 1.8mm variant; for larger gaps or natural stone with more variation, 2mm can offer more tolerance. Alternatives on Fepy include: - 1.8mm Delta Leveling System Strip: https://fepy.com/1-8mm-delta-leveling-system-strip-100-pcs - Tile Leveling Spacers 2mm Pack: https://fepy.com/tile-leveling-spacers-2mm-pack - Ceramic Tile Leveling Clips: https://fepy.com/ceramic-tile-leveling-clips

They’re ideal for DIY tiling projects where you want even grout joints and flat tile surfaces, such as bathroom floors and walls, kitchen backsplashes, showers, and other ceramic, porcelain, or stone tile installations.

The 100-piece pack provides ample quantity for larger projects and multiple installations, helping reduce restocking frequency and delivering a cost-effective solution for achieving consistent leveling and professional finishes.

Store in a cool, dry place away from direct sunlight. Keep the strips in their packaging to prevent bending or damage and use them within the intended project cycles for best results.