30 X 60 X 25 X 2.5MM SS316 Marble Angle

They indicate the profile size: two leg lengths (30 mm and 60 mm), a dimension related to the profile width (25 mm), and the material thickness (2.5 mm). This helps you identify the exact size and fit for your project.

SS316 contains chromium, nickel, and molybdenum, giving it superior corrosion resistance, especially in chloride-containing and marine environments. It’s more resistant to rust and staining than common grades like SS304, which makes it a better choice for outdoor, coastal, or chemical applications.

SS316 marble angle offers good strength, toughness, and weldability with excellent corrosion resistance. It’s suitable for structural framing, brackets, and supports where exposure to moisture or corrosive elements might occur. For precise mechanical values, refer to the material standards for SS316.

Typical steps: measure and mark, cut the angle to length using a suitable stainless steel saw, deburr edges, and then fasten with stainless steel bolts or weld as required. When bolting, use corrosion-resistant fasteners to avoid galvanic corrosion, and ensure proper alignment before securing.

It’s well-suited for outdoor installations, maritime or coastal settings, chemical environments, and any project where high corrosion resistance is important. It also works well for indoor structural framing and brackets where durability is a priority.

The part ships with a standard stainless steel surface finish. Stainless steel angles can often be polished, brushed, or passivated post-purchase if a different look or enhanced corrosion protection is desired, depending on your project requirements.

Clean with mild soap and water and dry thoroughly to prevent water spots. Avoid abrasive cleaners that could scratch the surface. For outdoor or marine use, occasional light passivation or applying a suitable rust-preventive treatment can help, depending on the environment.

SS316 offers superior corrosion resistance in chloride-rich environments (like salt water) compared with SS304. SS316L has similar corrosion resistance but lower carbon content, which can improve weldability and reduce carbide precipitation in welded structures. For harsh outdoor or marine applications, SS316 variants are typically preferred over SS304. If you’re choosing between these, consider exposure conditions, budget, and fabrication method.

Yes, Fepy typically offers multiple sizes of SS316 Marble Angle to fit various project needs. Check the catalog for available profiles and dimensions to choose the best match for your application.

It’s ideal for structural framing, brackets, supports, railings, and hardware where a strong, corrosion-resistant angle is needed. Marine and outdoor installations, as well as chemically exposed environments, are common use cases.

Wear cut-resistant gloves and eye protection when handling or machining. Use appropriate tools designed for stainless steel, deburr edges after cutting, and ensure proper ventilation if welding or grinding. Handle with care to avoid sharp edges and potential injuries.