3M™ 9322+ Aura™ Hand Sanding and Power Tool Respirator , FFP2, 10Pcs/PK

Key features include a 3-panel design for greater facial movement and comfort, low breathing resistance filter technology, a 3M Cool Flow exhalation valve for cooler wear, a sculpted nose panel, a chin tab for easy donning, and the respirator is flat-fold and individually packaged for hygiene and convenience.

FFP2 indicates a filtration efficiency of at least 94% for non-oil aerosols under EN 149:2001+A1:2009. In practice, this means strong protection against dust and mist generated in woodworking, sanding, and similar tasks, but it is not suitable for oil-based aerosols or gases.

Follow these steps: (1) Inspect the respirator and ensure the packaging is intact. (2) Place the respirator over your nose and mouth with the nose clip on top. (3) Use both hands to mold the nose piece to your nose, pressing along the edges for a secure seal. (4) Position the chin under the chin tab and adjust the straps so the mask seals comfortably without gaps. (5) Check for a snug seal by inhaling and exhaling gently; if you feel air leaks, readjust the fit.

The 3-panel design is intended to accommodate a wide range of face shapes and sizes, improving comfort and fit for many users. If you can’t achieve a secure seal after fitting, discontinue use and try a different size or model.

Fogging can occur if there’s a poor seal around the nose or if exhaled air escapes upward. To minimize fogging, ensure a tight seal with the nose clip, position the respirator high on the nose, and consider adjusting the fit or using anti-fog compatible eyewear. The Cool Flow exhalation valve helps with comfort but may not eliminate fogging entirely.

This respirator is designed for single-use. Replace it if it becomes damaged, soiled, damp, or hard to breathe through. Do not attempt to wash or reuse the respirator.

It is CE-certified and complies with EN 149:2001+A1:2009 as an FFP2 respirator. It is intended for dusts and mists only and is not suitable for gases, vapors, or oil-based aerosols, nor should it be used in oxygen-deficient environments.

Ideal for woodworking, sanding, grinding, drywall dust, plaster, cement, and other tasks that generate fine dust or non-oil aerosols. It provides protective filtration while allowing comfortable wear during longer sessions.

If you’re weighing options on Fepy, you can compare with similar 3M Aura models like the 3M 9320+ N95 (for non-oil aerosols) and the 3M 9332+ Aura (an FFP3 option) to assess differences in fit, filtration, and comfort. Example alternatives on Fepy include: 3M 9320 Aura N95: https://fepy.com/product/3m-9320-aura-n95 and 3M 9332 Aura FFP3: https://fepy.com/product/3m-9332-aura-ffp3

Store in its original packaging or a clean, dry place away from direct sunlight and extreme temperatures. Keep it flat and avoid bending the nose area excessively. Inspect before use, and discard if signs of damage or contamination are present.

For higher-risk tasks, consider using this respirator in combination with eye protection (safety glasses or goggles) and a face shield if there is a risk of flying debris. Always follow workplace safety protocols and manufacturer guidelines for PPE compatibility.