50mm x 3m GI Point Bead - Per Ctn

Specifications: 50 mm width for precise corners; 3 m length to cover larger sections; galvanised iron construction for corrosion resistance; durable and wear‑resistant; sold per carton; suitable for drywall and plasterboard corners; designed for easy installation with no adhesives or tools required.

Per the product listing, the GI Point Bead is easy to install with no adhesives or tools. Align the bead along the corner, press it into place so the metal nose seats against the edges, and trim any excess at the ends if needed. It’s designed to hold securely in place during finishing.

It's intended for interior drywall or plasterboard corners, including wall corners and stair corners, where a crisp, durable finish is desired.

This product features galvanised iron construction with a straight corner and a strong metal nose to deliver a neat, firm finish on sharp corners. Its 50 mm width offers precise edges and its 3 m length covers longer runs, making it ideal for bulk projects.

Yes. Wear gloves to protect against sharp edges, keep surfaces clean before installation, and store cartons in a dry place to prevent corrosion or deformation. The zinc-coated galvanised iron is durable but sharp edges can cause cuts.

Fepy offers other sizes and variants such as 60 mm width and different lengths. For example, see the Aluminium Corner Bead 50mm-3m at https://fepy.com/product/aluminium-corner-bead-50mm-3m and similar options at https://fepy.com/product/gi-corner-bead-60mm-3m and https://fepy.com/product/plastic-corner-bead-50mm-3m.

Compared to aluminum or plastic corner beads, the GI Point Bead uses galvanised iron for strength and durability in corners while keeping a tight, professional edge. Aluminum beads are lighter and resist corrosion differently; plastic beads are typically lighter but less durable under heavy wear. For alternatives, see https://fepy.com/product/aluminium-corner-bead-50mm-3m and https://fepy.com/product/plastic-corner-bead-50mm-3m.

Use it to finish interior drywall or plasterboard corners in homes or commercial spaces, particularly along walls and stairs where a sharp, durable corner is required. It’s well-suited for high-traffic areas due to its wear resistance.

Measure the required length, then cut the 3 m runs to fit using a suitable metal snip or saw. Ensure clean, straight cuts to maintain a crisp edge and avoid bending or damaging the bead.

If you’re not satisfied, you can return the item under Fepy’s standard returns policy. Contact customer support within the stated return window to initiate a return and receive guidance on eligibility and refunds.

Yes. Sold per carton and designed for long-term durability, the GI Point Bead offers a cost-effective solution for professional finishes on drywall and plasterboard corners while reducing restocking frequency on large projects.