8cm X 4cm X 6 M X 1mm Aluminium Hollow Section

Core specs: material is aluminium, cross-section 8 cm × 4 cm, length 6 meters, wall thickness 1 mm. It’s corrosion-resistant, lightweight, easy to cut/shape, and suitable for outdoor use in various climates.

A 1 mm wall thickness provides adequate strength for light- to moderate-load structural framing and non-load-bearing applications. It’s great for frame work, light supports, temporary structures, and outdoor installations where weight savings matter. For heavy structural loads, thicker sections would be more appropriate.

Common use cases include lightweight framing for shade structures, roof edge supports, wall and panel framing, window/door frames, DIY furniture frames, and general architectural or decorative framing where corrosion resistance and light weight are advantageous.

Cut with a fine-toothed metal saw or powered cutter suitable for aluminium. Deburr edges for a clean finish. Join with aluminium-compatible fasteners (self-tapping screws, rivets, or brackets) and consider corner gussets for added rigidity. Use protective gloves and eye protection during cutting and assembly.

Yes. Aluminium is naturally corrosion-resistant and performs well outdoors. For extreme or highly corrosive environments, consider additional protective coatings or coatings specified for outdoor architectural applications.

Compared to an 8x4x6m aluminium hollow section with thinner or thicker walls, these trade-offs exist: thinner walls save weight and cost but offer less stiffness; thicker walls provide greater strength for higher loads. On Fepy.com you can find similar products like: Aluminium Hollow Section 8x4x6m 0.8mm (weaker, lighter) at https://fepy.com/product/aluminium-hollow-section-8x4x6m-0-8mm and Aluminium Hollow Section 8x4x6m 2.0mm (stronger, heavier) at https://fepy.com/product/aluminium-hollow-section-8x4x6m-2mm. For alternatives with different cross-sections, see Aluminium Rectangular Hollow Section 8x4cm 2mm at https://fepy.com/product/aluminium-rectangular-hollow-section-8x4cm-2mm and Aluminium Square Hollow Section 4x4cm 1mm at https://fepy.com/product/aluminium-square-hollow-section-4x4cm-1mm.

Fepy.com offers various cross-sections and thicknesses to suit different performance needs. Common variants include thinner sections (e.g., 0.8 mm) for lighter weight projects and thicker sections (e.g., 1.5 mm or 2 mm) for higher load capacity. Check the site for the exact size options and availability.

Maintenance is minimal: wipe with a damp cloth to remove dirt and debris. Avoid harsh, abrasive cleaners. If needed, mild detergents approved for aluminium can be used. Rinse and dry to prevent water spots or oxidation over time.

Handle with gloves to protect against sharp edges, especially after cutting. Wear eye protection when cutting or drilling. Ensure edges are deburred before installation and secure all connections with appropriate fasteners to avoid movement or loosening over time.

If you need to return the product, follow Fepy.com’s standard return process as outlined on the site. (Note: specific terms and timeframes apply per product category and regional policy; check the site for the most current return guidelines.)