90MM PVC Long Bend

Made from rigid PVC, it features a 90mm inner diameter to accommodate thicker pipes, a corrosion-resistant coating, a smooth finish to resist wear, and is tested to perform under a range of temperatures and pressures for durable, leak-free service.

Yes. It’s designed to fit standard 90mm PVC piping. For a secure joint, cut the pipe ends square, clean them, then use PVC primer and cement to form a leak-proof socket connection.

1) Dry-fit the bend to check alignment. 2) Cut the pipe square. 3) Clean the pipe ends. 4) Apply PVC primer to the pipe and fitting. 5) Apply PVC cement and insert the pipe into the socket. 6) Hold briefly until the joint sets. No special tools are required.

It’s suitable for plumbing, drainage, and professional piping systems, including water supply lines in residential or commercial projects, construction piping networks, and irrigation runs that require a precise 90° turn.

The long bend has a larger radius curvature, providing smoother flow, reduced pressure loss, and better performance in tight spaces with less stress on the joint compared with a shorter-radius elbow.

Choose 90mm to match your pipe diameter. Confirm the pipe outer diameter matches the fitting’s socket size and that the wall thickness is compatible. When in doubt, compare with other 90mm fittings on the site.

Use within the rated temperatures and pressures for PVC. Do not expose PVC to high-heat fluids beyond its rating. When cementing, work in a ventilated area and follow standard safety practices.

PVC solvent-cement joints are intended to be permanent. If a joint leaks or needs replacement, you typically cut out the damaged section and install a new bend.

Periodically inspect joints for cracks or leaks, ensure no movement or stress on the bend, keep the pipe ends clean, and avoid aggressive chemicals that may degrade PVC over time.

For options with similar functionality in the same 90mm size, you can compare with the 90mm PVC Short Bend and the 90mm PVC Elbow (90 Degree) to choose the radius and footprint that best fits your layout. Short Bend and Elbow variants: https://fepy.com/product/90mm-pvc-short-bend and https://fepy.com/product/90mm-pvc-elbow-90-degree.

Explore related fittings at https://fepy.com/product/90mm-pvc-long-bend (this product), https://fepy.com/product/90mm-pvc-short-bend, and https://fepy.com/product/90mm-pvc-elbow-90-degree to compare options.