ABB Inora 1 Gang 13A Double Pole Switched Socket Outlet with Dual USB Type-A Ports White BL261

The ABB Inora BL261 combines a switched 13A outlet and two USB charging points within a compact 86 x 86 mm format. This can reduce reliance on plug-in charging adapters, keep worktops and bedside areas organised, and support modern charging requirements in UAE villas, apartments, offices, hotels and fit-out projects. Its white finish also coordinates easily with common interior schemes.

Isolate the electrical supply before inspection or cleaning. Wipe the faceplate with a soft, dry or slightly damp cloth and avoid abrasive cleaners, solvents or direct water spray. Stop using the outlet and arrange inspection by a qualified electrician if there is discoloration, heat, buzzing, a loose plug connection, cracked plastic, damaged USB ports or intermittent power.

No weatherproof or IP rating is provided in the listed product data, so it should be treated as an indoor socket unless ABB documentation confirms otherwise. Construction sites, gardens, balconies and other dusty, damp or exposed UAE environments require appropriately rated weatherproof accessories, suitable enclosures and compliant temporary-power protection.

The available product information confirms dual USB charging capability but does not specify the connector type, combined output, individual port current or support for protocols such as USB Power Delivery or Quick Charge. Buyers should verify these specifications from the product label or ABB technical documentation before selecting it for fast-charging devices or USB-C-only cables.

It can supply a compatible appliance provided the appliance plug and operating load do not exceed 13A and the final circuit is designed for that use. High-load or continuously operated equipment should be checked against the appliance manufacturer's instructions, circuit capacity and project requirements. Fixed heavy-duty appliances may require a dedicated connection unit, isolator or circuit instead of a general-purpose socket.

The socket must be connected to a correctly designed final circuit with suitable overcurrent protection, earthing and residual-current protection where required by UAE regulations and the relevant authority. Cable size, MCB or RCBO rating, circuit type, expected load and fault-loop conditions must be determined by the electrical designer or licensed contractor. The socket's 13A rating must not be treated as the circuit-breaker rating.

It may replace a compatible 1-gang socket if the wall box dimensions, depth, wiring, earthing arrangement and circuit protection are suitable. USB-equipped sockets can require more rear clearance than standard outlets. An electrician should inspect the existing box and conductors, confirm compatibility and test the completed installation rather than relying only on the faceplate size.

The faceplate dimensions are approximately 86 x 86 mm, with an overall listed depth of approximately 44.2 mm. Because the integrated USB electronics and cable terminations require additional space, the electrician should check the installation drawing and use a compatible 1-gang wall box with sufficient internal depth. A shallow box or congested conduit arrangement may prevent safe cable bending and proper termination.

Installation should be completed by a licensed electrician. The circuit must first be isolated and proven dead using suitable test equipment. The electrician should verify the back-box size and depth, connect live, neutral and earth conductors to the correctly marked terminals, tighten connections to ABB's specified torque, secure the socket level to the wall box and complete polarity, earth continuity, insulation-resistance and functional tests before energising the circuit.

It is suitable for indoor locations such as bedrooms, living rooms, kitchens where permitted, hotel rooms, offices, meeting rooms, reception areas and workstations. The integrated USB ports are particularly useful beside beds, desks and counters. For bathrooms, wet areas, outdoor locations or exposed installations, use only a socket with the required IP rating and install it in accordance with the applicable electrical zones and regulations.

The 13A switched socket format is commonly used in UAE buildings. Before installation, the contractor should confirm the applicable product approval, socket standard, USB specifications and project requirements. Installation must follow current UAE electrical regulations, the relevant authority requirements such as DEWA, ADDC or SEWA where applicable, and the approved project drawings and specifications.

Yes, the design allows a compatible appliance to use the 13A socket while electronic devices are connected to the USB charging ports. The total connected load must remain within the socket and circuit ratings. The product data does not state the USB voltage, current or fast-charging protocol, so these details should be confirmed before use with devices requiring specific charging standards.

It’s a 1‑gang, 13A switch socket in white with built‑in USB charging. The design combines a standard socket and a USB charging capability in one wall unit, letting you power devices and use the socket for other plug‑in items at the same time.

The ABB Inora BL261 is a white, 1-gang switched socket outlet combining a 13A power socket, double-pole switching and dual USB charging ports in one unit. It is designed for convenient power and USB charging in homes, offices, hotels and other indoor spaces. The product measures approximately 44.2 x 86 x 86 mm and has EAN 6941593437306.