ABB Inora 3 Gang 1 Way 10AX Switch White BL103

3 Gang means the switch assembly has three separate switch modules in one plate. 1 Way indicates each switch operates a single circuit in an on/off manner. So you can control three independent lights or devices from one unit, each with its own on/off control.

The switch is rated for 10 Amps. It’s intended for typical 230V–240V lighting circuits in residential settings. The finish is white, and the unit is marketed under the Inora BL103 branding in collaboration with ABB.

The description for this model specifies a white finish. If you’re seeking alternative finishes, you may want to browse other finish options on Fepy to compare aesthetics and compatibility.

This 3-gang 1-way switch is suitable for wall mounting in living rooms, hallways, bedrooms, or any area that requires control of up to three separate lighting circuits or devices from a single location.

Power must be fully isolated at the breaker before starting. Remove the existing plate, connect the live and load wires to the corresponding terminals for each gang, secure the switch in the back box, reattach the faceplate, and restore power to test. If you’re not experienced with electrical wiring, consult a qualified electrician.

Ensure the circuit is de-energized before installation, use appropriate back boxes and wall plates, and follow local electrical codes. Do not expose the switch to moisture or water, and avoid using it with loads beyond its 10A rating.

For alternatives, you can explore other 3-gang 1-way switches and 10A options on Fepy to compare pricing, finishes, and mounting styles. Quick results can be found at: https://fepy.com/search?q=3%20Gang%201%20Way%2010A%20Switch

Typically you get the 3-gang faceplate assembly with the 3 individual switches. Depending on the listing, mounting screws or a back box may be included or sold separately; always check the product details for your specific purchase.

If you need to return it, check Fepy’s return policy on your order page. The policy typically covers unopened or unused items within a specified window, with the usual conditions applied. If you’re unsure, contact Fepy support for guidance on returns.

First ensure power is off and connections are secure. Confirm that each gang is wired to its corresponding load and that there are no loose wires. If the issue persists, recheck the wiring against the wiring diagram in the listing, or consult a qualified electrician.

The ABB Inora BL103 is a white, three-gang, one-way wall switch designed to provide independent on/off control of three electrical circuits from one location. Each rocker can typically control a separate lighting circuit or another compatible load, subject to the switch rating and circuit design. Its compact 86 x 86 mm faceplate and clean finish suit residential, commercial and construction projects in the UAE.

“3 gang” means the accessory has three separate switch rockers within one faceplate. “1 way” means each rocker controls its connected circuit from a single switching location. It is suitable where three lights or compatible loads need independent control at one point, but it is not intended for two-location switching such as controlling the same light from both ends of a corridor.

The ABB Inora BL103 has a stated current rating of 10 amps. The connected load must remain within the voltage, current and load-type ratings marked on the product or stated in ABB documentation. LED drivers, motors, fans and other inductive or high-inrush loads can place greater stress on switch contacts than standard resistive loads, so an electrician should confirm compatibility and use a suitable relay or contactor where required.

The listed dimensions are approximately 37.1 x 86 x 86 mm. The 86 x 86 mm faceplate format is commonly used in UAE building projects, but the installer should verify the concealed back-box dimensions, fixing centres, wiring space and installation depth before fitting.