ABB Gazelle G9201 RMS Digital Clamp Meter With Calibration Certificate

The calibration certificate confirms that the meter has been tested and its measurements are traceable to standard references, ensuring you can rely on its accuracy for critical readings.

The meter includes an integrated temperature sensor and displays temperature readings directly on the screen. You don’t need an external probe to measure ambient or surface temperature aligned with the device’s measurement mode.

The meter can store up to 50 readings in its built-in memory. You can save measurements as you test, then access and review them later via the memory function on the display.

The backlight helps reading the display in low-light conditions. It is typically activated via a dedicated backlight button or menu option on the meter.

Peak hold captures the highest values during a measurement period. Use it when testing pulsed or transient signals to ensure you don’t miss brief spikes.

IP67 indicates the meter is dust-tight and protected against immersion in water up to a standard depth for a limited time. This makes it suitable for use in harsher environments, but you should still handle it with care and avoid submersion longer than specified.

The meter is powered by two AAA batteries and includes a low battery indicator to alert you when replacement is needed.

Ideal for electrical troubleshooting, panel and circuit testing, automotive diagnostics, and on-site measurements in field service, workshops, or maintenance tasks where RMS accuracy and quick diagnostic readings are valuable.

Compared to related ABB Gazelle models, the G9201 emphasizes true RMS AC measurements, an integrated temperature sensor, a 50-reading memory, a calibration certificate, backlight, data/peak hold, and rugged IP67 construction. For specifics, you can compare with ABB Gazelle G9202 and G9203 variants on Fepy: https://fepy.com/product/abb-gazelle-g9202-rms-digital-clamp-meter and https://fepy.com/product/abb-gazelle-g9203-rms-digital-clamp-meter

Out of the box, insert two AAA batteries if not pre-installed, power on the meter, and select the measurement mode (AC voltage/current, temperature, etc.). To measure current, open the clamp jaw and clamp around a single conductor, then read the value on the display. Use the memory, data hold, and peak hold features as needed.