ABB Inora 1 Gang Data Outlet Housing Classic Grey BL331-H-G

This face plate is suitable for structured cabling outlet points used for internet, local area network, telephone or other low-voltage communication services, subject to the selected module. Typical applications include UAE villas, apartments, offices, retail units, hotels, schools, meeting rooms and building refurbishment projects.

The product is described as a data face plate, so buyers should not assume that an RJ45 keystone jack, data module, cable or back box is included. Confirm the package contents and select a compatible Cat5e, Cat6 or other communication module according to the project specification and required network performance.

Compatibility depends on the module format and the ABB Inora accessory system. Before ordering, check the dimensions, mounting method and product reference of the intended RJ45, telephone or communication module. For construction projects, using components approved within the same manufacturer range helps achieve correct fit, alignment and finish.

It can form part of a Cat6 outlet when fitted with a compatible Cat6-rated module and connected using compliant Cat6 cable, termination hardware and installation practices. The face plate itself does not determine network category or transmission speed; overall performance depends on every component in the structured cabling channel.

First isolate nearby electrical circuits and confirm that the installed back box and data module are compatible. Route the communication cable without excessive pulling or tight bends, terminate it to the selected module using the specified wiring scheme, secure the module in its support and fit the face plate squarely against the finished wall. Test the completed data link with an appropriate cable tester before handover.

Use a compatible single-gang flush or surface-mounted back box with sufficient internal depth for the selected data module, cable bend radius and termination. Back-box dimensions and fixing centres should be checked against the ABB Inora mounting system before installation, particularly where boxes have already been embedded in blockwork, drywall or concrete walls.

Yes, it may be used on drywall or masonry installations when paired with the correct compatible mounting box and support accessories. For drywall, use a securely fixed cavity box; for blockwork or concrete, use a properly aligned concealed box installed flush with the final plaster or tile level. Accurate box positioning prevents gaps, distortion and an uneven finished appearance.

Yes. Data cabling should be routed with suitable separation from mains power cables to reduce electromagnetic interference and support safe installation. Where crossings are unavoidable, they are generally made at approximately 90 degrees. Contractors should follow the project specification, cable manufacturer's guidance and applicable UAE electrical and telecommunications requirements.

Its single-gang format and neutral Classic Grey finish make it relevant to modern UAE residential and commercial interiors. Suitability must still be verified against consultant specifications, approved material submittals, local authority requirements and the selected structured cabling system. In regulated projects, confirm acceptance with the relevant UAE authority, telecom provider or project consultant before procurement.

A standard indoor data face plate should not be exposed directly to rain, dust, washing water, high humidity or intense sunlight unless the complete assembly has a suitable certified ingress-protection rating. For balconies, external service areas, gardens or other exposed UAE locations, use a weatherproof enclosure and accessories specifically rated for the environment.

Check that the face plate is level, firmly secured, undamaged and flush with the finished surface. Confirm that the module is correctly terminated, cables are labelled, the outlet identifier matches the patch-panel schedule and the link passes the required continuity or certification test. Protect the face plate from paint, plaster, dust and impact until final project handover.

Switch off nearby electrical circuits where necessary, then wipe the surface with a soft, dry or lightly damp cloth. Avoid abrasive pads, solvents, strong chemicals and excessive water, as these may affect the finish or enter the data connection. Inspect the outlet periodically for loose fittings, cracked components or damaged network connectors.

The ABB Inora BL331-H-G offers a coordinated single-outlet solution with a clean Classic Grey appearance for visible data points. When installed with compatible modules and accessories, it helps contractors create orderly, accessible and professionally finished network outlets across villas, offices, hotels and other UAE building projects.