ABB Inora 1 Gang Data Outlet Housing Starry Black BL331-H-885

This 1 gang data face plate is suitable for structured cabling points in villas, apartments, offices, retail units, hotels, meeting rooms and other UAE construction projects. Depending on the compatible module installed, it may be used for Ethernet, telephone or other extra-low-voltage communication connections.

The product is described as a data face plate, so buyers should not assume that an RJ45 keystone jack, data module or network connector is included. Confirm the package contents before installation and order a compatible module separately when required.

A 1 gang face plate is intended for a single wall-box position rather than a multi-gang arrangement. The term refers to the mounting format and does not necessarily indicate the number or type of data ports. Check the compatible ABB Inora module arrangement, back-box dimensions and project drawings before ordering.

First isolate and protect the work area, install a compatible flush or surface-mounted back box, and route the ELV data cable without exceeding its specified pulling tension or bend radius. Terminate the cable onto the selected compatible data module using the correct wiring scheme and tool, secure the module and support frame, then fit the Starry Black face plate evenly. Test the completed outlet with an appropriate cable tester and label it according to the network schedule.

Compatibility depends on the back-box format, fixing centres, depth, support frame and selected ABB Inora mechanism. UAE projects may use different British-style or project-specific back boxes, so installers should compare the approved shop drawing and ABB product dimensions before installation. Adequate box depth should also be allowed for the data module and cable bend radius.

Yes. Data and communication cables should be routed and terminated with suitable separation from mains power cables to reduce electromagnetic interference and support safe installation. Use dedicated ELV containment, partitions or separation distances in accordance with the cable manufacturer's instructions, the project's structured cabling specification and applicable UAE authority requirements.

The face plate itself does not determine network performance. Category 5e, Category 6, Category 6A or another cable category may be used only when paired with a compatible data module, patch panel and patch cord of the same required performance class. The complete permanent link or channel should be installed and tested to the applicable ISO/IEC or ANSI/TIA structured cabling requirements stated in the project specification.

Yes. The Starry Black finish provides a modern appearance that can complement dark switches, sockets, joinery, stone finishes and contemporary interior schemes commonly used in UAE villas, apartments, offices and hospitality projects. For a consistent result, coordinate the face plate with other devices from the same ABB Inora range and approved project finish schedule.

It should be treated as an indoor face plate unless ABB documentation confirms a suitable ingress-protection rating for the complete installed assembly. For balconies, gardens, external walls, plant rooms or wet areas, use an appropriately IP-rated enclosure and accessories selected for dust, moisture, heat and UV exposure under UAE conditions.

Check the model number BL331-H-885, approved finish, module compatibility, back-box depth and cable category against the material submittal and shop drawings. After installation, inspect alignment and fixing security, verify outlet labels, and conduct continuity, wire-map and performance testing appropriate to the specified cabling category. Installation should follow manufacturer instructions, project consultant requirements and relevant UAE building, fire-safety and local authority regulations.

Switch off or protect nearby services before cleaning, then wipe the face plate with a soft, dry or slightly damp cloth. Do not use abrasive pads, strong solvents, bleach or excessive water because they may damage the finish or enter the data connection. Periodically inspect the plate for loose fixings, cracks or damaged modules, especially in frequently used commercial areas.

Confirm the model number, gang format, finish, support frame, back-box type and intended data module against the ABB Inora technical documentation and project-approved material schedule. Contractors should also verify whether the listing is for the face plate only and ensure that compatible modules, back boxes, cables and termination accessories are included separately in the bill of quantities.