ABB Inora 1 Gang 45-Degree Satellite F-Type Outlet Classic Grey BL308-G

This socket is used as the final wall outlet between a building's satellite distribution cabling and compatible receiving equipment, such as a satellite receiver or television system. It is suitable for apartments, villas, hotels, offices and other UAE projects that include structured TV or satellite distribution.

The connection point is oriented at an angle rather than projecting straight out from the wall. This arrangement can reduce cable protrusion, support cleaner routing and help minimise tight bends behind television units, cabinets or wall-mounted displays. Adequate clearance should still be maintained to protect the coaxial cable and connector.

The BL308-G is a satellite signal outlet and must not be used as a mains power socket. It is intended for compatible extra-low-voltage coaxial signal cabling. Power, data and satellite services should be terminated in their designated accessories and separated in accordance with the project design and applicable electrical requirements.

Yes, the product is identified as a 1 Gang SAT socket, providing one dedicated satellite connection position. Before ordering for a construction project, confirm whether each room requires a single satellite feed or multiple feeds for equipment such as twin-tuner receivers.

Use a good-quality 75-ohm coaxial cable specified for the building's satellite distribution system. Cable screening, attenuation, connector type and frequency performance should match the dish, multiswitch, amplifier and receiver design. The exact cable and termination requirements should be confirmed against ABB documentation and the project's ELV or ICT specification.

Route the approved coaxial cable to a compatible concealed or surface mounting box, prepare the cable without damaging its centre conductor or shielding, and terminate it using the connection method specified by ABB. Fit the socket securely, check that no braid strands create an unintended short circuit, attach the compatible Inora frame or plate, and test the completed outlet for continuity and signal quality.

Installation should be completed by a qualified ELV, TV or satellite technician familiar with coaxial termination and building distribution systems. The technician should verify cable integrity, connector quality, signal level and signal quality at the outlet rather than relying only on a visual inspection.

Contractors should confirm compatibility with the selected ABB Inora frame, mounting box, coaxial connector and satellite distribution design. They should also coordinate outlet locations with architectural layouts, joinery, television mounting points and nearby electrical accessories. Installation must follow ABB instructions, approved project specifications and applicable UAE authority and building requirements.

Satellite coaxial cabling should be segregated from mains power wiring unless the containment system, accessory arrangement and project specification expressly permit otherwise with suitable barriers and separation. Proper segregation improves safety and can reduce electromagnetic interference. Follow the consultant's drawings, local UAE requirements and relevant installation standards.

Yes, it is relevant to UAE villas, apartments, hotels, offices and mixed-use developments where a fixed satellite TV outlet is required. The Classic Grey finish works well with many modern interior schemes, while the angled outlet is useful where televisions or media cabinets are positioned close to the wall.

It can be used behind a wall-mounted television when the mounting position provides enough clearance for the socket, coaxial plug and cable bend radius. Coordinate the outlet location with the TV bracket before completing wall finishes so the connector is not crushed and remains accessible for testing or maintenance.

This type of indoor wiring accessory should not be exposed directly to rain, dust, condensation or harsh outdoor conditions unless it is installed within a suitably rated enclosure and ABB confirms the arrangement is acceptable. For balconies, rooftops or external service areas in the UAE, select weather-resistant equipment with an appropriate IP rating.

Use the specified 75-ohm coaxial cable, avoid sharp bends and excessive cable lengths, make clean terminations, maintain continuous shielding and use compatible connectors throughout the system. Splitters, multiswitches and amplifiers should be correctly selected and balanced. Testing with suitable satellite measurement equipment is recommended before handover.

Switch off or disconnect connected equipment where practical, then wipe the visible surface with a soft, dry or lightly damp cloth. Do not use abrasive pads, solvents or excessive water. Periodically inspect the coaxial connection for looseness, corrosion or physical damage, especially during property maintenance or tenant handover.