ABB Inora 2 Gang 13A Double Pole Switched Socket Outlet with Dual USB Type-A Ports Starry Black BL262-885

The 13A socket format is commonly used with Type G plugs in UAE buildings, where the nominal electricity supply is generally 230V at 50Hz. Project engineers should verify the product's current conformity documentation and ensure installation meets applicable UAE electrical regulations, local authority requirements and project specifications. Depending on the emirate and project, requirements from authorities such as DEWA, ADDC or SEWA may apply.

Key features include two 13A socket outlets, local switching, integrated USB charging and an ABB Inora Starry Black faceplate. The combined arrangement can reduce the need for separate plug-in USB adapters. Exact details such as USB quantity, USB-A or USB-C format, total USB output, terminal capacity, dimensions and applicable product standards should be checked against the ABB datasheet for model BL262-885.

It is suited to indoor residential and commercial locations such as bedrooms, living rooms, kitchens outside restricted wet zones, hotel rooms, offices, meeting rooms, reception areas and retail interiors. It is especially useful near desks, bedside tables and worktops where users need mains power and USB charging. Do not install it outdoors, in bathrooms or in exposed damp and dusty areas unless ABB confirms a suitable IP rating and the installation complies with local zone requirements.

Installation should be completed by a licensed electrician with the circuit isolated, locked out where required and proven dead before work begins. The electrician should verify line, neutral and earth conductors, connect them only to the correctly marked terminals, tighten terminals to ABB's specified torque, fit the mechanism into a compatible wall box and test polarity, earth continuity, insulation resistance and protective-device operation. The manufacturer's wiring instructions and applicable UAE regulations must take priority.

The required wall box format and minimum depth depend on the product dimensions, terminal arrangement, USB power module and available cable space. USB-equipped sockets can require more rear clearance than standard outlets, so contractors should verify the ABB dimensional drawing before first-fix work. The box must allow safe conductor bending, secure fixing and sufficient separation without compressing cables behind the accessory.

Yes, it can be considered for villas, apartments, hotels, offices and other interior fit-outs where a 13A switched socket with built-in USB charging is specified. During design coordination, consultants should check outlet locations, circuit loading, wall-box depth, furniture clearances, finish schedules and USB requirements. A sample approval is advisable for large projects to confirm appearance, compatibility and installation details before procurement.

Replacement may be possible if the existing circuit, conductors, earthing, wall box, fixing centres and box depth are compatible with the ABB BL262-885. Because the integrated USB module may need additional rear space, a direct swap should not be assumed. A qualified electrician should inspect the existing installation, confirm circuit protection and complete the required electrical tests after replacement.

The switching arrangement for the mains outlets and USB module must be confirmed from the ABB wiring diagram or technical datasheet. On some USB sockets, the USB supply remains energised whenever the circuit is live, while on others it may be linked to a switch. Contractors should verify this point before installation where standby power control, hotel room controls or energy-management requirements are important.

The USB ports are intended for compatible low-voltage USB-powered devices such as smartphones, tablets and small accessories, subject to the module's rated output. Charging speed depends on voltage, current, total shared output and support for any fast-charging protocol. High-power laptops or proprietary fast-charging devices may require their original charger unless the ABB specification explicitly confirms compatibility.

Circuit protection must be selected according to the circuit design, cable size, installation method, connected load and applicable UAE authority requirements. The socket should be connected to a properly earthed final circuit with suitable overcurrent and additional protection where required. An electrical consultant or licensed electrician should determine the correct MCB or RCBO arrangement rather than selecting protection based only on the socket's 13A rating.

The Starry Black finish is well suited to contemporary villas, premium apartments, hotels, offices and retail interiors using dark hardware or contrasting wall finishes. For a coordinated result, designers should compare a physical sample with lighting controls, data outlets, door hardware and surrounding finishes. Avoid abrasive cleaners and harsh chemicals that could affect the visible surface.

Keep the faceplate clean with a soft, dry or lightly damp cloth after isolating the electrical supply where necessary. Do not spray cleaner directly into the socket or USB openings, and avoid solvents, abrasive pads and excessive moisture. Arrange inspection by a qualified electrician if there is overheating, discoloration, a burning smell, loose switching, damaged USB ports, cracking or intermittent power.

Confirm the model number BL262-885, Starry Black finish, required quantity, USB port type and output, socket standard, wall-box compatibility, installation depth and relevant conformity documents. Contractors should also compare the product against the approved material submittal, electrical drawings, authority requirements and consultant specifications. Checking these details helps prevent mismatches during first-fix and final installation.