ABB Inora 2 Gang 13A Double Pole Switched Socket Outlet Classic Grey BL239-G

The 13A rating indicates the socket is intended for standard fused 13A plug applications. Double switched means the two outlets can be controlled separately. DP stands for double pole, meaning the switching mechanism is designed to disconnect both live and neutral rather than only the live conductor. This can provide more complete appliance isolation, subject to correct wiring and the manufacturer's design.

This socket is relevant to UAE residential, commercial and hospitality projects that use British-style 13A plug systems. Before installation, the consultant or electrical contractor should confirm its conformity with the project specification, the latest ABB documentation, applicable BS 1363 requirements, local authority rules and the relevant UAE electrical regulations. Final acceptance may vary by emirate, utility authority and project.

Typical applications include villas, apartments, offices, shops, hotel rooms and other indoor spaces requiring two switched 13A outlets. It may be used in living rooms, bedrooms, work areas and similar dry locations. For kitchens, utility rooms, outdoor areas or locations exposed to moisture, dust or heat, the required IP rating, installation zone and protective enclosure must be assessed separately.

It may be used only where the appliance load, plug, cable and circuit protection are compatible with the socket's 13A rating. The combined and individual loading conditions must follow ABB's instructions and the approved circuit design. Fixed high-demand equipment such as water heaters, cookers or large air-conditioning units may require a dedicated isolator or connection unit rather than a general-purpose socket.

Installation should be completed by a qualified electrician. The supply must be safely isolated and proven dead before work begins. The electrician should connect live, neutral and protective earth conductors to the correctly marked terminals, tighten them to the manufacturer's specified torque, arrange the cables without damage and secure the socket to a compatible wall box. The circuit should then be tested for continuity, insulation resistance, polarity, earthing and protective-device operation before energisation.

A compatible two-gang wall box with sufficient internal depth is generally required for a double socket. Box dimensions and depth should be selected using the current ABB product drawing because conductor size, terminal layout and cable bending space affect installation. In blockwork, concrete or drywall construction, the box must be securely fixed, level and flush with the finished wall surface.

Yes, the protective earth terminal must be connected to an effective earthing system in accordance with the approved wiring design. RCD or RCBO protection should be provided wherever required by applicable UAE regulations, the local authority, project specifications and the nature of the installation. The socket switch is not a substitute for circuit protection, earthing or safe isolation procedures.

It should not be assumed to be weatherproof because no outdoor IP rating is stated in the supplied product data. For gardens, balconies, construction sites or other exposed locations, use an appropriately rated weatherproof socket or approved enclosure with suitable seals, cable entries and RCD protection. UAE heat, humidity, dust and occasional water exposure must be considered when selecting outdoor electrical accessories.

Yes, it can be considered for residential developments, office fit-outs, retail interiors and hospitality projects where a Classic Grey 13A double switched socket matches the electrical schedule and interior finish. Consultants should confirm the model number BL239-G, colour, plate dimensions, wall-box compatibility, certification and authority approval before procurement. Using a consistent ABB Inora range can also help maintain a coordinated appearance across the project.

Post-installation checks should include protective conductor continuity, insulation resistance, polarity, secure termination, earth fault loop or equivalent protective measures, and RCD or RCBO operation where installed. Both socket switches and outlets should be function-tested using suitable calibrated equipment. Results should be recorded in the project's electrical inspection and testing documentation in line with applicable regulations.

Switch off and safely isolate the circuit before maintenance. Clean the faceplate with a soft, dry or lightly damp cloth and avoid abrasive pads, solvents or aggressive chemicals that may damage the finish. Periodically check for looseness, cracking, discoloration, overheating, arcing sounds or a burning smell. Any damaged or overheated socket should be taken out of service and inspected by a qualified electrician.

The BL239-G combines two independently switched 13A outlets with double-pole switching in a contemporary Classic Grey finish. It is suited to buyers searching for an ABB double socket for modern UAE residential and commercial interiors. Correct specification should still include verification of technical ratings, compliance documents, installation environment and compatibility with the selected back box and wiring system.