ABB Inora 2 Gang 13A Double Pole Switched Socket Outlet Starry Black BL239-885

DP means double pole. A double-pole switch is designed to disconnect both the live and neutral conductors when switched off, providing more complete isolation at the socket than a single-pole design. The protective earth connection remains continuous and must be correctly terminated.

Yes, it is intended for 13A plug applications commonly used in UAE homes, offices, hotels and commercial buildings. The circuit design, cable size, protective device and installation method must comply with the applicable UAE electrical regulations, local authority requirements and project specifications. A qualified electrician should confirm compatibility before installation.

It can be used for compatible 13A-plug appliances such as televisions, computers, chargers, lamps and general household or office equipment. High-load appliances must be checked against the socket rating, circuit capacity and manufacturer instructions. The two outlets do not increase the permissible capacity of the supplying circuit.

Both outlets may be used simultaneously when the connected loads, wiring and circuit protection remain within their permitted ratings. Electricians should consider total circuit demand and avoid overloading through multi-plug adapters or extension leads, particularly with high-power appliances.

Installation should begin by isolating and verifying the electrical supply as dead. A qualified electrician must connect the live, neutral and earth conductors to the correctly marked terminals, secure the socket to a compatible wall box, ensure that no bare conductor is exposed, and complete continuity, polarity, insulation-resistance and functional tests before energising the circuit. Always follow ABB instructions and the approved project drawings.

Yes. The ABB Inora Starry Black double socket can be specified for new villas, apartments, offices, hotels, retail spaces and refurbishment projects. Contractors should verify wall-box compatibility, mounting depth, wiring layout, finish schedules and local authority requirements before bulk installation.

This product should be treated as an indoor socket unless ABB documentation for the exact model confirms an appropriate IP rating. Kitchen placement must account for heat, moisture and sink locations. Bathrooms, wet areas and outdoor installations require suitable zoning, RCD protection and appropriately IP-rated accessories in accordance with applicable UAE regulations.

Use a wall box that matches the socket's fixing arrangement and provides sufficient depth for safe conductor bending and terminal clearance. Cable type and conductor size must be selected according to circuit design, installation method, ambient temperature, voltage drop, fault protection and local regulations. Confirm exact box dimensions and terminal capacity from ABB technical documentation before installation.

Clean the faceplate with a soft, dry or slightly damp cloth after isolating the supply where necessary. Do not use abrasive pads, solvents or aggressive chemical cleaners, as these may damage the Starry Black surface. During construction, protect the socket from paint, plaster, dust and impact, and remove protective coverings only after finishing work is complete.

The electrician should check terminal tightness, protective-conductor continuity, polarity, insulation resistance, earth-fault protection and switch operation using approved test procedures. The faceplate should sit level and secure without trapped cables or visible damage. Test results should be recorded as required by the project consultant, contractor quality plan and relevant UAE authority.

The ABB Inora BL239-885 combines two practical 13A outlets, individual switching, double-pole isolation and a modern Starry Black appearance. It is suitable for coordinated electrical fit-outs where contractors, consultants and property owners require a recognised electrical brand and a contemporary finish for residential or commercial interiors.