ABB Inora 2 Gang 13A Double Pole Switched Socket Outlet White BL239

DP stands for double pole. When an outlet is switched off, its double-pole mechanism disconnects both the live and neutral conductors. This provides more complete local isolation than a single-pole switch and is particularly relevant for electrical installations in which neutral isolation is required by the project design or applicable wiring regulations.

The BL239 is intended for compatible 13A British-style fused plugs commonly used in the UAE. Before connection, confirm that the plug format, appliance voltage, frequency and current demand match the electrical installation. Plug adaptors should not be used as a permanent substitute for the correct plug and socket arrangement.

It is suitable for many UAE residential and commercial projects that specify 13A British-style switched sockets. Installation must follow the approved project drawings, local authority requirements and the relevant UAE electricity distributor's regulations, such as those applicable in Dubai, Abu Dhabi or the respective emirate. A licensed electrician should verify final compliance before installation.

Yes, both outlets can be used simultaneously, provided the connected load remains within the rating of the socket, circuit, protective device and wiring. The 13A marking should not be interpreted as permission to exceed the circuit's designed capacity. High-load appliances should be checked carefully, and fixed heavy equipment may require a dedicated circuit or connection unit.

This socket is suitable for dry indoor locations such as villas, apartments, offices, shops, workshops, staff accommodation and other commercial interiors. Typical applications include general-purpose outlets for computers, televisions, chargers and suitable household appliances. The selected position should remain accessible and comply with project requirements for mounting height, clearances and electrical zoning.

In kitchens, it should be positioned away from sinks, water sources, heat and cooking equipment in accordance with the approved electrical layout. Bathrooms and wet areas have stricter electrical zones and protection requirements, so this socket should only be used where specifically permitted. For outdoor, washdown or exposed locations, use a suitably IP-rated weatherproof socket instead.

Installation should be completed with the circuit isolated, locked out where required and proven dead using suitable test equipment. A qualified electrician should mount the socket on a compatible wall box, identify the live, neutral and earth conductors, terminate them at the correctly marked terminals and tighten connections to the manufacturer's requirements. After fitting the faceplate, the circuit should be inspected and electrically tested before energisation.

Use a compatible double-gang flush or surface mounting box with adequate depth for the terminals and conductor bend radius. Cable size and circuit arrangement must be selected by the electrical designer or licensed electrician according to the connected load, installation method, ambient temperature, voltage drop and protective device. The protective earth conductor must be connected correctly, including bonding a metal back box where required.

The circuit should have an appropriately rated overcurrent protective device and any required residual-current protection. The exact MCB or RCBO rating, cable size and circuit configuration depend on the approved design and local authority rules. UAE conditions such as high ambient temperatures and grouped cables can affect conductor capacity, so appropriate derating must be considered.

Yes, the BL239 is relevant to villa construction, apartment developments, office fit-outs, retail spaces and maintenance work where double 13A switched outlets are specified. Its two independently controlled outlets can reduce the number of accessory positions required. Contractors should verify the model, finish, mounting-box compatibility and consultant-approved material schedule before bulk installation.

Double-pole switching isolates both live and neutral conductors when the socket is turned off, offering a clear local control point for connected equipment. This is useful for routine shutdown and appliance servicing procedures. However, the switch is not a substitute for locking out and proving a circuit dead before electrical work.

Keep the faceplate clean and dry, using a soft cloth without abrasive cleaners or excessive moisture. Periodically check for loose mounting, discoloration, unusual heat, buzzing, cracking or a weak switch action. Stop using the outlet if damage or overheating is observed and arrange inspection by a qualified electrician; internal parts should not be repaired by untrained users.

Confirm that the project requires model BL239, a white finish, two switched 13A outlets and double-pole operation. Also check the plug standard, system voltage, mounting-box dimensions, indoor-use conditions and quantity shown on the electrical schedule. For consultant-controlled UAE projects, obtain material approval and verify compliance documentation against the latest project and authority requirements.