ABB Inora 2 Gang 13A Double Pole Switched Socket Outlet with Illumination Royal Gold BL240-PG

Double-pole switching disconnects both the live and neutral conductors when an outlet is switched off. This provides more complete isolation than single-pole switching and is useful in installations where enhanced control and electrical safety are priorities. The protective earth connection remains continuous and must be correctly terminated.

The neon indicators provide a visible indication of the switching or power status of the outlets, depending on the product's internal configuration. This helps users quickly identify whether an outlet is switched on, particularly in dim rooms, hotel interiors, offices and utility areas.

Yes, a 13A switched socket is relevant to UAE residential and commercial projects that use British-style plug systems. Before installation, the contractor should confirm the product markings, applicable BS 1363 requirements, project specifications and the rules of the relevant UAE authority, such as DEWA, ADDC or the local utility provider. Final approval depends on the project's consultant and authority requirements.

It is intended for compatible 13A British-style plugs commonly used in the UAE. Typical applications include televisions, computers, chargers, lamps and suitable small appliances. The connected load must remain within the socket rating, circuit design and manufacturer instructions. High-load appliances should only be connected where the circuit and outlet have been specifically assessed for that duty.

Both outlets can generally be used simultaneously, but the total demand must not exceed the capacity of the final circuit, protective device, wiring or any limits stated by ABB. A qualified electrician should evaluate expected loads, cable size and circuit protection, especially in kitchens, offices and commercial fit-outs.

Installation should be completed by a qualified electrician. The supply must first be isolated, locked out where applicable and proven dead. Live, neutral and earth conductors should then be connected to the clearly marked terminals in accordance with the ABB wiring instructions. Terminals must be tightened to the specified torque, conductors arranged without strain and the faceplate fixed level to a compatible wall box. The circuit must be tested before energisation.

This double socket normally requires a compatible two-gang concealed or surface-mounted box. Box dimensions, mounting centres and minimum depth should be checked against the ABB Inora BL240-PG datasheet before procurement. Adequate depth is important for safe cable bending, terminal clearance and neat installation, particularly where larger conductors or multiple cables enter the box.

The electrician should perform the tests required by the approved project method statement and applicable UAE regulations. These commonly include protective-conductor continuity, insulation resistance, polarity, earth-fault loop verification and functional checks of both switches and neon indicators. Circuit protective devices and RCD protection, where required, should also be verified before handover.

Yes, the Royal Gold finish is well suited to premium villas, hotel rooms, majlis areas, executive offices, retail interiors and other decorative fit-outs. Contractors should coordinate the finish with nearby switches, data outlets and accessories and confirm that the selected ABB Inora range satisfies the project's electrical, architectural and consultant-approved material schedule.

It should not be assumed to be weatherproof unless ABB documentation states a suitable IP rating. For balconies, gardens, wash areas, plant rooms or other locations exposed to water, dust or humidity, use an appropriately IP-rated enclosure or weatherproof socket selected for the environmental conditions and installed with the required RCD protection.

Isolate the circuit before inspection or cleaning. Wipe the faceplate with a soft, dry or lightly damp cloth and avoid abrasive pads, solvents and aggressive chemical cleaners that could damage the decorative finish or printed markings. Loose fittings, heat discolouration, buzzing, damaged switches or intermittent neon operation should be investigated promptly by a qualified electrician.

Confirm model BL240-PG, the required Royal Gold finish, outlet and switch configuration, compatible wall-box dimensions, product certification, project authority requirements and consultant approval. Contractors should also check the number of points on the electrical drawings and coordinate matching ABB Inora accessories to maintain a consistent finish throughout the construction project.