ABB Inora 2 Gang 13A Double Pole Switched Socket Outlet with Illumination Starry Black BL240-885

DP means double pole. When an outlet is switched off, its double-pole mechanism isolates both the live and neutral conductors. This provides more comprehensive local isolation than a single-pole switch, subject to correct installation and the requirements of the applicable electrical design.

The neon indicators provide a visible indication of the socket switching status. This helps users identify whether an outlet is switched on, which is useful in homes, offices, hotel rooms, workshops and other indoor spaces. Indicator operation depends on correct wiring in accordance with the manufacturer's instructions.

It is intended for 13A socket applications and is relevant to UAE projects that use compatible UK-style socket systems. Before specification, the contractor should verify conformity with the approved project documents, the local electricity authority's regulations and applicable standards such as BS 1363 where required. UAE low-voltage supplies are generally 230V at 50Hz, but final compatibility must be confirmed by the electrical consultant or licensed contractor.

Yes, both outlets can be used simultaneously when the connected equipment, plug tops, circuit wiring and protective devices are correctly rated. The 13A marking applies to the socket outlet arrangement as defined by the manufacturer and relevant standard; it should not be interpreted as permission to exceed the designed circuit load. High-load appliances should be assessed by a qualified electrician.

Installation should be completed by a licensed electrician with the circuit isolated, locked out where applicable and verified dead. The electrician should confirm the mounting box size and depth, terminate live, neutral and earth conductors at the marked terminals, tighten connections to the manufacturer's specified torque, secure the accessory without trapping cables and test polarity, earthing, insulation resistance and protective-device operation before energising.

A compatible two-gang flush or surface mounting box is normally required for a double socket. Box dimensions, fixing centres and depth must be checked against the ABB Inora product data and the available wiring space before wall finishing. A deeper box may be necessary where larger conductors, multiple cables or conduit entries are used.

Yes, it can be incorporated into concealed wiring systems when installed with a compatible back box and correctly sized conduit, cables and accessories. During blockwork, plastering or drywall construction, the box should be aligned, securely fixed and protected from cement, dust and paint. Cable routes and installation zones must follow the approved electrical drawings and applicable UAE authority requirements.

The Starry Black finish is well suited to modern villas, apartments, offices, retail spaces, hotels and premium interior fit-outs. It can coordinate with dark wall finishes, joinery, furniture and other ABB Inora accessories. It is primarily an indoor electrical accessory unless ABB documentation specifically confirms a suitable environmental or ingress-protection rating for another application.

Location restrictions must be assessed carefully. In kitchens, suitable separation from sinks, heat and moisture should be maintained. Bathrooms and other wet areas are subject to electrical zones and additional protection requirements. For outdoor, dusty or wash-down locations, use an enclosure or socket with an appropriate verified IP rating rather than assuming this indoor decorative socket is weather-resistant.

Yes, the protective earth terminal must be connected and tested as part of the installation. RCD or RCBO protection may also be required depending on the circuit type, installation location, applicable wiring regulations and local authority rules. The electrician should verify earth continuity, polarity, fault-loop conditions and protective-device coordination before handover.

Contractors should verify the model number BL240-885, Starry Black finish, 13A double switched configuration, neon indicator requirement, double-pole operation, plug format, mounting-box compatibility and quantity required. They should also confirm consultant approval, project specifications, authority requirements and coordination with matching plates and accessories before bulk procurement.

Switch off and isolate the circuit before maintenance. Clean the visible surface with a soft, dry or lightly damp cloth and avoid abrasive pads, solvents, strong chemicals and excessive water. Periodic inspection should look for heat discolouration, cracking, loose mounting, unusual sounds or intermittent operation. Any electrical defect should be investigated by a qualified electrician.

The product combines two commonly used 13A outlets, individual switching, double-pole isolation, neon status indication and a contemporary Starry Black finish in one accessory. These features make it relevant to UAE residential and commercial fit-outs where functional socket control, coordinated interior design and compatibility with approved UK-style wiring accessories are required.