ABB Inora 1 Gang 13A Double Pole Switched Socket Outlet Classic Grey BL237-G

DP means double pole. When the socket switch is turned off, it isolates both the live and neutral connections to the outlet. This feature is useful where enhanced electrical isolation is required and is commonly specified for socket outlets in UAE homes, offices, shops and other building projects.

The socket is intended for standard fused 13A Type G plugs commonly used across the UAE. Before connection, confirm that the appliance plug, voltage, load and fuse rating are appropriate for the circuit. Adaptors should only be used if they are approved, correctly fused and suitable for the connected equipment.

Yes, a 13A switched socket configuration is widely used in UAE residential and commercial properties, where the nominal electricity supply is generally 230V at 50Hz and Type G plugs are common. The complete installation must still follow the approved project specification, applicable UAE electrical regulations and the requirements of the relevant local authority or utility.

It is suited to indoor locations such as bedrooms, living areas, offices, reception areas, retail units, hotel rooms and other dry internal spaces. The classic grey finish can complement contemporary interiors, exposed-services designs and darker wall finishes. Do not use it in wet, dusty or outdoor locations unless the completed installation includes an appropriately rated enclosure and meets the environmental requirements of the project.

The connected load must remain within the socket's 13A rating and the capacity of the final circuit. Equipment with high starting current, continuous heavy loads or a requirement for a dedicated connection should be assessed by a qualified electrician. Large water heaters, cookers, air-conditioning equipment and similar fixed loads may require dedicated isolators or circuits rather than a standard 13A socket.

Installation should be completed by a qualified electrician. The supply must first be safely isolated and verified as dead. The electrician should confirm box compatibility and cable condition, terminate the live, neutral and earth conductors at the correctly marked terminals, tighten connections to the manufacturer's requirements, secure the socket level to the mounting box and test polarity, earth continuity, insulation and protective-device operation before energising the circuit.

Confirm the model number BL237-G, 13A rating, single-gang requirement, classic grey finish, mounting-box dimensions, cable size, circuit protection and earthing arrangement. Contractors should also check wall depth, conduit entry, coordination with joinery or finishes, accessibility and the approved electrical drawings. A sample may be reviewed before bulk installation to ensure consistency across the project.

No. The double-pole switch provides local control and isolation at the socket, but it does not replace the distribution-board protective device, residual-current protection or a dedicated isolator where one is required. Circuit breakers, RCD or RCBO protection and cable sizing must be selected according to the circuit design and applicable UAE requirements.

Its suitability depends on the location, required ingress protection, safe separation distances and local electrical rules. A standard indoor socket should not be exposed directly to water, condensation, dust or weather. Kitchens, bathrooms, balconies, gardens and site facilities may require additional RCD protection, prescribed positioning and an IP-rated accessory or weatherproof enclosure selected by the project consultant or qualified electrician.

Yes, it can be specified for villas, apartments, offices, retail premises, hospitality interiors and similar fit-out work requiring a single 13A switched outlet. Its neutral classic grey appearance is particularly relevant to modern UAE interiors. Designers and contractors should verify that the selected Inora accessories match the project's approved finish schedule and mounting system.

A qualified electrician should inspect terminal security and conductor identification, then carry out the tests required by the project and applicable regulations. These normally include protective-conductor continuity, insulation resistance, polarity, earth-fault loop or equivalent verification, and testing of associated RCD or RCBO protection. Functional operation of the double-pole switch should also be confirmed.

Switch off and isolate the relevant circuit before maintenance. Wipe the faceplate with a soft, dry or lightly damp cloth and avoid abrasive pads, solvents, strong chemicals and excessive water. Periodically check for discoloration, cracking, looseness, unusual heat, buzzing or burning odours. If any defect is found, stop using the outlet and arrange inspection by a qualified electrician.

The ABB Inora BL237-G combines a commonly specified 13A socket format, double-pole switching and a classic grey finish suitable for coordinated modern interiors. It is relevant to UAE residential and commercial projects using Type G plug connections. Correct specification, professional installation, suitable circuit protection and compliance with approved project and local authority requirements remain essential.