ABB Inora 1 Gang 13A Double Pole Switched Socket Outlet with Illumination Classic Grey BL238-G

Double-pole switching means the socket switch is designed to isolate both the live and neutral conductors simultaneously. This provides more complete local isolation than a single-pole switch and is useful in UAE electrical installations where reliable appliance disconnection and maintenance safety are important.

The integrated neon indicator gives a clear visual indication of the socket's switched status. It helps users quickly identify whether the outlet has been switched on, which is practical in kitchens, utility areas, offices, workshops and other locations where appliance power status needs to be checked easily.

The socket's 13A format is commonly used with the Type G plug system found across the UAE. Suitability for a specific project must still be confirmed against the approved electrical drawings, project specifications and the requirements of the relevant authority, such as DEWA, ADDC or the applicable local utility and municipality.

It is intended for compatible 13A fused Type G plugs used on many household and commercial appliances. Typical applications may include computers, televisions, small kitchen appliances, chargers and office equipment, provided the connected load remains within the socket, circuit and appliance ratings.

This socket should only supply equipment whose operating current and starting current are within the outlet and circuit ratings. Heavy construction machinery, large compressors, welders, high-capacity heaters and similar loads may require dedicated industrial sockets, isolators or higher-rated circuits. A qualified electrical engineer should verify the load before connection.

Installation should be completed by a qualified electrician with the circuit safely isolated and proven dead. The electrician should confirm the mounting box size and depth, identify the live, neutral and earth conductors, terminate them according to ABB markings and approved wiring practices, secure the socket without trapping cables, and complete continuity, polarity, insulation and functional tests before energising.

Check that the supply voltage, circuit protection, cable size, earthing arrangement, back-box dimensions and installation environment are suitable. The mounting surface should be level, conductor insulation should be undamaged, and terminals must be tightened to the manufacturer's specified torque. The completed circuit should be tested in accordance with the project's approved inspection and testing procedure.

Yes. A protective earth conductor must be correctly connected where specified by the product terminals and installation design. Proper earthing is essential for fault protection and safe operation of Class I appliances. The earth connection and circuit protective conductor continuity should be tested by a qualified electrician before use.

A standard indoor socket should not be exposed directly to rain, irrigation water, dust or severe weather unless it is installed within a suitably rated weatherproof enclosure. Outdoor and damp-area installations in the UAE should use accessories with an appropriate IP rating and must comply with local electrical safety requirements.

The Classic Grey finish suits modern villas, apartments, offices, retail spaces, workshops and commercial interiors. It can coordinate well with grey walls, concrete-style finishes, metal partitions and contemporary electrical accessories, making it useful for both new construction and refurbishment projects.

It can be used in kitchens and utility areas when installed in an approved location away from water sources and within the permitted electrical zones. Circuit protection, mounting position and environmental suitability must follow the project design and relevant UAE authority requirements. Damp or splash-prone positions may require an appropriately IP-rated accessory.

It may be suitable as a replacement when the existing circuit, back box, wiring configuration and mounting dimensions are compatible. The power must be isolated first, and an electrician should inspect conductor condition, earthing, polarity and terminal capacity rather than assuming a direct fit.

Circuit protection must be selected according to the cable size, circuit arrangement, prospective load and applicable wiring regulations. Depending on the installation design, this may include an MCB or RCBO and suitable residual-current protection. The 13A fused plug also provides appliance-flex protection, but it does not replace correctly designed circuit protection.

Keep the faceplate clean and dry, using a soft cloth without abrasive cleaners or solvents. Periodically check for looseness, cracking, discoloration, overheating, buzzing, sparks or an unreliable switch. Stop using the outlet and arrange professional inspection if any defect or heat damage is observed.