ABB Inora 1 Gang 13A Double Pole Switched Socket Outlet with Dual USB Type-A Ports Royal Gold BL261-PG

DP means double pole. Unlike a single-pole switch that disconnects only the live conductor, a double-pole socket switch disconnects both live and neutral when turned off. This offers more complete local isolation of the connected appliance, although it does not replace isolation at the distribution board before electrical installation or maintenance.

The 13A socket format is well suited to the Type G plug system commonly used in the UAE, where the nominal supply is typically 230V at 50Hz. Suitability for a specific project must still be confirmed against the approved electrical drawings, project specifications and the requirements of the relevant authority, such as DEWA, ADDC or the applicable local utility and municipality.

The socket can be used with compatible Type G appliances whose connected load remains within the outlet, circuit and wiring ratings. Typical applications include televisions, computers, desk equipment, chargers and small household appliances. High-load equipment must be checked carefully against its nameplate current, and fixed heavy-duty appliances should use the dedicated connection method specified by the electrical design.

The integrated USB function provides a convenient charging point for compatible mobile devices and accessories without occupying the 13A socket with a separate adapter. The charging connector type, output voltage, maximum current and supported charging protocols should be verified from the product packaging or ABB technical datasheet before use, as these details are not stated in the supplied product information.

Installation should be completed by a qualified electrician. The circuit must first be isolated and proven dead, after which the live, neutral and protective earth conductors should be terminated at the correctly marked terminals in accordance with the ABB instructions. The unit should be fitted into a compatible wall box, aligned without twisting the faceplate and tightened to the manufacturer's specified terminal torque. Electrical testing should be completed before energisation.

Use a compatible concealed or surface mounting box with sufficient depth for the socket mechanism, USB module and safe conductor bending. Cable size, protective device rating and circuit arrangement must follow the approved design and applicable UAE wiring regulations. Do not force the unit into a shallow box, trap insulation behind terminals or leave exposed copper. Confirm mounting dimensions and box compatibility before procurement.

Yes, it is suitable for many indoor installations, including villa bedrooms, apartment living areas, offices, hotel rooms, reception areas and premium retail interiors. The Royal Gold finish is particularly relevant where electrical accessories must coordinate with decorative hardware and luxury interior schemes. Contractors should confirm that the selected finish and model match the project's approved material schedule.

This socket should only be installed where its enclosure and ingress-protection rating are suitable for the location. Do not place it where it may be exposed to rain, washing water, condensation, dust or excessive heat unless appropriate protection is provided and the installation is permitted by local regulations. Bathrooms, kitchens, balconies and outdoor areas require careful assessment of zones, clearances, RCD protection and enclosure ratings.

The socket circuit should be protected by a correctly rated circuit breaker and, where required by UAE regulations or the project specification, an RCD or RCBO with the appropriate residual-current sensitivity. Earthing and polarity must be verified, and the circuit must not be overloaded. Protection selection, cable sizing and maximum demand calculations should be performed by a qualified electrical professional.

Typical verification includes protective-conductor continuity, insulation resistance, polarity, earth-fault loop or equivalent protective-measure testing, RCD or RCBO operation where installed, functional switching and USB charging checks. The electrician should also inspect terminal tightness, faceplate alignment and the absence of exposed conductors. Test results should be recorded as required by the project quality plan and relevant authority.

Double-pole switching provides local disconnection of both live and neutral conductors, which can improve isolation for plugged-in equipment. This is useful in residential, hospitality and commercial projects where consultants may specify DP switched outlets for additional control and consistency. Final acceptance depends on the project's electrical specification, authority requirements and approved product submittal.

Switch off the relevant circuit before maintenance and wipe the faceplate with a soft, dry or lightly damp cloth. Do not use abrasive pads, solvents, acidic cleaners or excessive water, as these may damage the decorative finish or enter the electrical mechanism. Periodic inspection should check for heat discolouration, cracking, loose mounting, unusual odours or poor plug retention; any defect should be assessed by a qualified electrician.

Confirm the model number BL261-PG, Royal Gold finish, single 13A socket configuration, double-pole switch and required USB connector specification. Also check wall-box compatibility, installation depth, approved project brand schedule, quantity and local authority requirements. For consultant-led construction projects, request the current ABB technical datasheet and compliance documentation before submitting the product for approval.