ABB Inora 1 Gang 13A Single Pole Switched Socket Outlet with Red Rocker and Illumination White BL213

SP means single pole. In a single-pole switched socket, the rocker switch normally disconnects the live conductor while the neutral and earth connections remain continuous. Correct polarity is therefore essential, and installation should be completed and tested by a qualified electrician.

The red rocker makes the switch easy to identify and can help distinguish a designated outlet from standard sockets. On UAE projects, red accessories may be selected for essential, dedicated, UPS-backed or controlled services according to the consultant's electrical schedule. The rocker colour alone does not confirm the circuit function, so the socket should be labelled and connected only as specified in the approved drawings.

Its 13A format is relevant to UAE buildings that use Type G plug and socket systems based on the British pattern. Before installation, the contractor should verify the product certification, socket configuration, voltage and frequency rating, project specifications, and requirements of the applicable local authority, such as DEWA, ADDC or the relevant emirate's electricity provider.

The socket can be considered for homes, offices, shops, hotels, workshops and other indoor building areas requiring a single 13A switched outlet. Its red rocker is particularly useful where a designated supply must be visually differentiated. Final use should follow the MEP drawings, load schedule and circuit-identification requirements.

Only equipment with an operating current, plug and manufacturer requirement compatible with a 13A socket should be connected. Fixed or high-load appliances such as larger air conditioners, water heaters, cookers and pumps often require a dedicated circuit and an appropriately rated isolator rather than a standard 13A socket. The appliance rating and electrical design must be checked by a qualified electrician.

The supply must first be isolated, locked out where required and proven dead with suitable test equipment. The electrician should confirm the back-box type and depth, prepare the conductors without damaging them, and connect live, neutral and protective earth to the correctly marked terminals. Terminal screws should be tightened to ABB's specified torque, conductors arranged without excessive strain, and the faceplate fixed level without overtightening.

Testing should include protective-conductor continuity, insulation resistance, polarity, earth-fault loop or equivalent protective-device verification, and functional operation of the rocker. Where RCD or RCBO protection is installed, its operation should also be tested. Results should be documented according to the project inspection and testing procedure and applicable UAE authority requirements.

Yes. A 13A socket outlet must be connected to an effective protective earthing conductor through the designated earth terminal. The earth conductor should never be omitted, cut back or used for another purpose. Proper earthing and circuit protection are critical for reducing electric-shock risk and enabling protective devices to operate during a fault.

A compatible flush or surface back box with sufficient depth for the socket body, conductors and earth continuity arrangement is required. Cable size and protective-device rating must be selected from the circuit design after considering connected load, installation method, ambient temperature, grouping and voltage drop. Contractors should verify the accessory dimensions and terminal capacity against the ABB technical documentation before first-fix work.

Location-specific rules must be followed. In kitchens, suitable separation from sinks, heat and moisture should be maintained. Bathrooms and other wet locations are subject to electrical zones and additional protection requirements. Unless ABB documentation confirms an appropriate IP rating and outdoor suitability, this socket should be treated as an indoor accessory and not exposed directly to rain, washdown, dust or condensation.

RCD or RCBO protection may be required for socket-outlet circuits under the applicable wiring regulations, local authority rules and project specifications. The protective device must have the correct current rating, residual-current sensitivity and disconnection characteristics for the circuit. Selection and coordination should be handled by the project's electrical engineer or qualified contractor.

It can provide visual differentiation, but the red colour does not itself make the socket UPS-backed, emergency-rated or suitable for life-safety systems. Such use depends on the upstream supply, circuit segregation, protection, cabling, labelling and approved project design. Contractors should follow the consultant's legend and apply permanent identification where required.

Keep the faceplate clean and dry, using a soft cloth without abrasive or solvent-based cleaners. Periodically check for loose mounting, cracked plastic, discoloration, heat marks, buzzing, damaged shutters or poor plug retention. In dusty, humid or high-temperature areas, inspection intervals may need to be shorter. Isolate the circuit and arrange professional inspection immediately if overheating or damage is observed.

The ABB Inora BL213 combines a recognised electrical brand, a single 13A outlet, local switching and a clearly visible red rocker. These features support consistent accessory schedules and straightforward circuit identification across residential and commercial fit-outs. Suitability should still be confirmed against approved material submittals, authority requirements and the latest ABB product datasheet.