ABB Inora 1 Gang 13A Single Pole Switched Socket Outlet Classic Grey BL224-G

The 13A rating indicates the maximum socket current stated for the product, while SP means single pole. A single-pole switch operates the live conductor when the socket is switched off. The final circuit design, cable size, protective device and connected load must be checked by a qualified electrician rather than determined from the socket rating alone.

Yes, a 13A switched socket is relevant to UAE buildings because Type G and BS 1363-style accessories are widely used with the UAE's nominal 230V, 50Hz electrical supply. Before installation, the contractor should verify the product documentation and approvals against the project specification, applicable UAE regulations and the requirements of the relevant local authority or utility.

This socket is suitable for appropriate indoor locations in villas, apartments, offices, shops, hotels and other commercial developments. Typical applications include supplying household appliances, office equipment, chargers and portable tools whose load remains within the circuit and socket ratings. Appliance plugs must be compatible with the socket configuration.

It may be installed in suitable dry indoor kitchen or utility-room positions when permitted by the electrical design and kept away from water, heat and other hazards. Do not assume that the standard unit is weatherproof or water-resistant, because no IP rating is provided in the available product information. Outdoor, wash-area and exposed installations require a suitably rated weatherproof enclosure or socket selected for that environment.

Installation should be completed with the supply isolated, locked out where required and proven dead. A qualified electrician should confirm the correct mounting box, route and prepare the conductors, connect live, neutral and protective earth to the marked terminals, tighten them to ABB's specified torque, secure the socket without trapping cables and fit the faceplate squarely. The circuit must then be inspected and electrically tested before energisation.

Use a compatible single-gang mounting box with sufficient depth for the socket mechanism, conductor bend radius and terminal space. Cable type and conductor size must be selected according to the circuit load, installation method, ambient temperature, voltage drop, protective device and local wiring requirements. Confirm the exact box dimensions, terminal capacity and minimum depth in the ABB technical documentation before procurement or first-fix work.

Yes, protective earthing must be provided wherever required by the socket design and installation regulations. The circuit protective conductor should be connected to the designated earth terminal, with any required metal back-box bonding maintained. Never use the socket if the earth conductor is absent, damaged or unverified; continuity and polarity should be tested by a competent electrician.

The socket must form part of a correctly designed final circuit protected by a suitable circuit breaker or other overcurrent protective device. RCD or RCBO protection should be provided where required by the applicable wiring regulations, local authority, project specification or installation environment. The protective device rating is based on the complete circuit design and must not be selected solely from the socket's 13A rating.

It can supply compatible equipment only when the appliance current, plug, duty cycle and circuit capacity are suitable and remain within applicable ratings. High-load appliances, motors and site tools may have significant starting current or require a dedicated circuit. For construction-site use, contractors should also assess impact, dust, moisture, cable management and temporary-power requirements rather than treating a standard indoor socket as a site-rated outlet.

The classic grey finish coordinates well with concrete-effect walls, dark joinery, metal details and contemporary residential or commercial interiors commonly specified in UAE projects. Using matching ABB Inora accessories across a room can provide a consistent appearance. A physical sample should be approved where exact colour matching is important because lighting, surrounding finishes and screen settings can affect colour perception.

Post-installation checks should include secure termination, protective-conductor continuity, insulation resistance, polarity, earth-fault protection and operation of the socket switch. Where RCD or RCBO protection is installed, its performance should also be verified using appropriate test equipment. Test results should be recorded in accordance with the project's inspection and commissioning procedures.

Switch off and isolate the circuit before maintenance. Clean the faceplate with a soft, dry or lightly damp cloth, and avoid abrasive pads, solvents, excess water and spraying cleaner directly into the socket. Arrange inspection by a qualified electrician if there is discoloration, heat, buzzing, cracking, loose mounting, damaged contacts or intermittent operation.

Verify the model number BL224-G, 13A single-pole switched configuration, plug compatibility, mounting-box requirements, terminal capacity, finish, environmental suitability and required certification. The consultant or electrical contractor should also confirm compliance with the approved drawings, load schedule, local authority requirements and project material-submittal process. For large developments, obtain the current ABB datasheet and an approved sample before bulk installation.