ABB Inora 1 Gang 13A Single Pole Switched Socket Outlet with Illumination Royal Gold BL229-PG

SP means single pole. The socket switch disconnects the live conductor when switched off, while the neutral remains connected. Correct polarity and earthing are therefore essential, and installation should be completed and tested by a qualified electrician in accordance with the manufacturer's instructions and applicable UAE electrical regulations.

The neon indicator provides a visible status indication associated with the switched socket, helping users identify its operating condition at a glance. This is useful in homes, offices, hotel rooms, workshops and building service areas. The exact indication behaviour should be confirmed from ABB's wiring diagram supplied with the product.

The socket is suitable for compatible appliances whose current demand does not exceed the socket rating or the capacity of the connected circuit. Typical uses may include televisions, computers, chargers, lamps and suitable household or office equipment. High-load appliances must be checked against their nameplate rating, circuit design and manufacturer requirements before connection.

Yes, its 13A switched format is relevant to many UAE residential and commercial projects that use British-style socket systems. Suitability for a particular development must still be confirmed against project specifications, local authority requirements and the regulations of the relevant utility or municipality, such as DEWA or the authority serving the applicable emirate.

Isolate and verify the electrical supply before installation. A qualified electrician should mount the socket in a compatible wall box, terminate live, neutral and earth conductors at the correctly marked terminals, tighten connections to ABB's specified torque, fit the front plate without damaging the finish and then complete polarity, continuity, insulation and functional tests before energising the circuit. Always follow the official ABB installation instructions.

Yes. The BL229-PG can be specified for villas, apartments, offices, hotels, retail units and other interior fit-out projects, subject to the approved electrical schedule. Contractors should confirm wall-box compatibility, wiring accessories, circuit protection, cable size, mounting position, finish schedule and consultant approval before bulk installation.

Yes. Protective earthing is essential for a 13A socket outlet and must not be omitted. The earth conductor should be correctly terminated, and earth continuity must be verified as part of testing and commissioning. Metallic wall boxes should also be bonded where required by the applicable wiring rules and project design.

Circuit protection must be selected by a qualified electrical professional according to cable size, installation method, expected load, fault level and applicable UAE requirements. The socket should be connected to a properly designed final circuit with suitable overcurrent protection. RCD or RCBO protection should be provided where required by local regulations, project specifications or the installation environment.

Do not assume this decorative socket is weatherproof or suitable for wet locations unless ABB documentation confirms the required ingress-protection rating. Installations near water, in bathrooms, kitchens, balconies or outdoor areas must comply with prescribed electrical zones and protection requirements. Use an appropriately IP-rated accessory and suitable RCD protection wherever the environment demands it.

Keep the front plate in its protective packaging until dusty or wet construction activities are complete. Avoid contact with paint, cement, gypsum, tile adhesive, abrasive cleaners and metal tools. Install the decorative plate during the final fixing stage, handle it with clean gloves and clean it only with a soft, dry or lightly damp cloth.

The electrician should verify conductor termination, earth continuity, insulation resistance, polarity, protective-device operation and the mechanical security of the accessory. The switch and neon indicator should be functionally checked, and test results should be recorded in accordance with the project's inspection and commissioning procedures.

It may be suitable where the existing installation uses a compatible wall box, wiring system and 13A socket configuration. Before replacement, check the box depth and condition, conductor length, earthing, circuit protection and mounting arrangement. The supply must be isolated, and replacement work should be performed by a qualified electrician.

Use the complete identification: ABB Inora 13A SP Single Switched Socket with Neon, Royal Gold, model BL229-PG and SKU 82116-NOS. Include the required quantity, finish, wall-box requirements, circuit designation and installation location in the material submittal. Consultants and contractors should verify the latest ABB technical data and obtain project approval before procurement.