ABB Inora 2 Gang RJ45 Cat 6A Data Outlet Starry Black BL317-885

CAT.6a structured cabling can support 10 Gigabit Ethernet over a permanent link or channel of up to 100 metres when every component—including the cable, connectors, patch panels and patch cords—is correctly installed and CAT.6a compliant. Actual network speed also depends on the connected switches, routers, network interface cards and installation quality.

The BL317-885 is described as a 2 gang data socket and is intended to accommodate two data connection positions within one wall location. This is useful where two wired Ethernet connections are required, such as for a computer and IP telephone, a smart television and gaming console, or two office workstations. Confirm the supplied components and module configuration before installation.

It is suitable for indoor structured cabling applications in villas, apartments, offices, meeting rooms, hotels, schools, clinics, shops and other UAE construction projects. Typical uses include connecting computers, smart televisions, IP phones, printers, access points, CCTV network equipment and building automation devices to a wired LAN.

Installation should be completed by a qualified ELV or structured cabling technician. Isolate nearby electrical circuits where applicable, install the correct back box, route the CAT.6a cable without crushing or sharp bends, terminate each conductor according to the selected T568A or T568B scheme, maintain cable-pair twists close to the termination point, secure the socket and fit the faceplate. Use the same wiring scheme throughout the project and follow ABB instructions and approved project drawings.

Use a genuine CAT.6a cable of the appropriate shielding type specified for the project. The data outlet, cable, patch panel and patch cords should have compatible category and shielding characteristics to achieve reliable CAT.6a performance. For UAE construction projects, select cable with the required fire-performance rating for the installation area, such as low-smoke, zero-halogen cable where specified.

It may be installed within a coordinated wiring layout, but data and power cabling must maintain the separation required by the project specification and applicable electrical and structured cabling standards. Avoid running network cable parallel and close to mains cables for long distances. Where crossing is necessary, a near-right-angle crossing helps reduce electromagnetic interference. Use segregated containment and approved back-box arrangements where required.

Yes, it is relevant to UAE residential and commercial projects requiring modern high-speed network outlets and a dark decorative finish. Suitability for a specific project should be verified against consultant specifications, authority requirements, approved material submittals and the selected structured cabling system. Installation should follow applicable UAE regulations and recognised standards such as ISO/IEC 11801 or ANSI/TIA-568 where specified.

A correctly terminated CAT.6a channel can carry both data and Power over Ethernet for compatible devices such as IP cameras, VoIP phones and wireless access points. PoE capability depends on the network switch or injector, connected equipment, cable construction, connector compatibility and installation conditions. Cable bundling, ambient temperature and the required PoE power level should be considered during system design.

CAT.6a provides additional bandwidth and improved control of crosstalk compared with lower-category cabling, making it suitable for bandwidth-intensive applications and long-term network planning. It is commonly selected for workstations, Wi-Fi access points, audiovisual systems, IP surveillance, smart-home controls and other connected building services that may benefit from 10 Gigabit Ethernet capability.

Installers should observe the cable manufacturer's bend-radius and pulling-tension limits, avoid excessive jacket removal, preserve the twist of each conductor pair up to the termination, and use compatible CAT.6a components. Shielded systems require correct shield continuity and grounding in accordance with the system design. Poor workmanship or mixing lower-category components can reduce the completed link's performance.

Yes. Each installed network link should be labelled and tested using a calibrated structured cabling certifier suitable for CAT.6a. Certification should check parameters such as wire map, insertion loss, return loss, length, propagation delay, near-end crosstalk and related performance limits. Test reports are often required for consultant approval, handover documentation and construction quality records.

This data socket is primarily intended for protected indoor use unless ABB documentation and the project specification state otherwise. For outdoor, damp, dusty or exposed UAE locations, install network connections inside a suitably rated weatherproof enclosure and use outdoor-rated cable and accessories appropriate to the environmental conditions.

Disconnect connected equipment before cleaning and wipe the faceplate with a soft, dry or lightly damp cloth. Do not use abrasive pads, solvents or aggressive chemical cleaners, as these may damage the Starry Black finish. Periodically inspect the outlet for loose mounting, damaged ports or unreliable connections, particularly in frequently used commercial areas.

Confirm the model number BL317-885, Starry Black finish, required number of data positions, back-box compatibility and whether the listed product includes all required modules, supports and faceplate components. Also verify compatibility with the project's cable shielding type, wiring accessories, structured cabling specification and interior finish schedule.