ABB Millenium 13A Double Pole Double Switched Socket Black Glass AM239147-BG

Key specifications include a 13A rated current, 250V AC rated voltage, dual BS 13A socket outlets, switched operation, double-pole isolation and flush mounting. Its stated dimensions are 42 x 147 x 86 mm. The product has secure cable terminals intended for dependable fixed-wiring connections when installed correctly.

Double-pole switching disconnects both the live and neutral conductors when the relevant switch is turned off. This provides more complete local isolation than single-pole switching. The protective earth conductor remains permanently connected and must not be switched.

Yes. The dual BS 13A outlet configuration is intended for the Type G fused plugs widely used in the UAE. Contractors should still verify plug compatibility, circuit voltage, earthing and the appliance load before connection.

It is suitable for dry indoor areas such as villas, apartments, offices, hotel rooms, reception spaces, meeting rooms and premium retail interiors. It can supply compatible equipment including televisions, computers, lamps and small household appliances, provided the connected load remains within the circuit and socket ratings.

Its 250V AC rating, Type G-compatible BS socket format and flush-mounted configuration make it relevant to many UAE residential and commercial projects. Final selection and installation should comply with the applicable local authority requirements, approved project specifications and the current electrical regulations for the relevant emirate.

Installation should be completed by a licensed electrician. The supply must be isolated and proven dead before work begins. The electrician should confirm the compatible flush box, connect live, neutral and earth conductors to the marked terminals, tighten connections to ABB's specified torque, position the mechanism without trapping cables, fit the matching frame and test polarity, earthing, insulation and switching before energising.

Check the model number AM239147-BG, 13A and 250V AC ratings, dual BS outlet format, wall-box compatibility, available mounting depth, cable capacity and circuit design. The stated product dimensions are 42 x 147 x 86 mm, so the installer should verify that the selected back box and finished wall arrangement provide adequate clearance.

Yes, provided a compatible flush box is correctly positioned and securely fixed. During blockwork or drywall preparation, coordinate the box location, conduit entries, finished wall level and mounting depth with the electrical drawings. The socket should be installed square and flush after dusty or wet finishing work is substantially complete to help protect the black glass surface.

Both outlets may be used simultaneously with compatible Type G plugs, but the electrician must ensure that the total demand is suitable for the socket, connected circuit, cable size and protective device. A 13A marking should not be interpreted as permission to overload the final circuit or connect unsuitable high-demand equipment.

Use in kitchens depends on correct positioning and protection from water, steam, heat and impact. Bathrooms, wash areas and outdoor locations may require specific zones, ingress protection and weather-resistant accessories. Because no IP rating is stated in the supplied specifications, this model should not be assumed suitable for wet or exposed outdoor conditions without written technical confirmation.

Clean the faceplate only after isolating the supply. Use a soft, dry or lightly damp microfiber cloth, then dry the surface immediately. Avoid abrasive pads, blades, solvents, acidic cleaners and excessive water, as these may scratch the glass, damage the finish or allow moisture to reach electrical components.

A qualified electrician should perform the tests required by the applicable project and local regulations. These commonly include protective-conductor continuity, insulation resistance, polarity, earth-fault loop or protective-device verification, functional switching checks and confirmation that the faceplate and terminals are secure. Test results should be documented where required.

This ABB socket combines dual 13A outlets, local switching, double-pole isolation, concealed flush installation and a black glass appearance. It is well suited to projects where contractors and interior designers need a coordinated premium finish alongside practical power access and secure fixed-wiring termination.