ABB Millenium 13A Double Pole Double Switched Socket Matt Gold AM239147-MG

Key specifications include a rated current of 13A, rated voltage of 250V AC, dual BS 13A socket outlets, double-pole switching and flush-mounted installation. Its stated dimensions are approximately 42 x 147 x 86 mm. The socket also features secure cable terminals intended to provide dependable fixed-wiring connections when installed correctly.

Double-pole switching disconnects both the live and neutral conductors when an outlet is switched off. This provides more complete local isolation than single-pole switching, which normally disconnects only the live conductor. The protective earth connection remains continuous and must not be switched.

Yes, its 250V AC rating and BS-style 13A socket configuration are suited to the electrical supply and plug format commonly used in the UAE. Final selection and installation must comply with the applicable UAE electrical regulations and the requirements of the relevant local authority, such as DEWA, ADDC or the authority serving the project location.

This socket is suitable for indoor areas such as villas, apartments, offices, hotel rooms, reception spaces, meeting rooms and premium retail interiors. It can supply compatible 13A plug-in appliances, office equipment, televisions, chargers and general household devices, subject to circuit capacity and the appliance load.

Both outlets can be used simultaneously, provided the connected loads remain within the socket manufacturer's ratings and the capacity of the final circuit, protective device and fixed wiring. An electrician should assess high-load appliances or multiple loads rather than assuming that every combination is suitable for continuous operation.

The unit is intended for flush mounting, with the wiring and mounting box concealed behind the finished wall. Installation generally involves isolating and verifying the circuit as dead, confirming box compatibility and depth, terminating live, neutral and earth conductors at the identified terminals, securing the mechanism, fitting the coordinating frame or plate and carrying out the required electrical tests. Installation should be completed by a licensed or qualified electrician.

Before installation, confirm the approved electrical layout, circuit rating, cable size, protective device, earthing arrangement, mounting-box dimensions, wall depth and finished surface level. Contractors should also verify that the matt gold finish and ABB Millenium frame configuration match the project's approved material schedule and that adequate space is available for safe cable termination without crushing or sharply bending conductors.

It can be used in either wall type when installed with a compatible flush box and appropriate fixing method. Masonry walls normally require a recessed metal or PVC box positioned before final plastering, while gypsum-board partitions require a suitable dry-lining box or framed support. The box must be level, secure and deep enough for the socket body, cable bends and terminals.

This product is primarily intended for dry indoor locations. Installation near sinks, wet zones, bathrooms, balconies or outdoor areas requires an enclosure and ingress-protection rating appropriate to the location, together with required RCD protection and regulatory clearances. Do not assume that the decorative faceplate alone provides water or dust protection; consult the project specification and a qualified electrician.

Yes. The protective earth conductor must be correctly connected and verified during testing. The circuit must also use appropriately rated overcurrent protection and, where required by UAE regulations or the installation location, residual-current protection. Protective-device selection depends on the circuit design, cable size and applicable local authority requirements.

Use a soft, dry or slightly damp non-abrasive cloth and avoid solvents, acidic cleaners, polishing compounds, bleach and abrasive pads. During plastering, painting and fit-out, protect the socket from dust, cement residue, moisture and impact. The circuit should remain safely isolated when cleaning around the outlet, and liquid must not enter the mechanism.

It is a 13A socket outlet for compatible plug-connected equipment. Large fixed appliances, water heaters, cooking equipment, air-conditioning systems and other high-current loads may require dedicated circuits, isolators or connection units rather than a standard socket. Always compare the appliance nameplate current and manufacturer instructions with the circuit design before connection.

The AM239147-MG combines two practical 13A outlets, individual local control, double-pole isolation, concealed flush mounting and a contemporary matt gold appearance. It is well suited to UAE residential, hospitality and commercial projects where coordinated electrical accessories, dependable fixed-wiring termination and a refined architectural finish are important.