ABB Millenium 13A Double Pole Double Switched Socket with LED Antique Gold AM240147-AG

The socket is rated at 13A and 250V AC and uses a dual BS 13A outlet configuration. It has double-pole switching, LED status indication and secure terminals for fixed wiring. The unit is flush mounted and measures approximately 42 x 147 x 86 mm. Its model number is AM240147-AG.

Double-pole switching disconnects both the live and neutral conductors when the socket is switched off. This provides more complete local isolation than single-pole switching. It does not replace circuit isolation at the distribution board before inspection, maintenance or electrical work.

The integrated LED provides a clear visual indication of the socket or connected-circuit status. This helps users identify whether the outlet is switched on, particularly in bedrooms, offices, hotel rooms and other areas where quick status confirmation is useful.

Yes, its 250V AC rating and BS 13A socket format are compatible with the voltage range and Type G plug system commonly used in the UAE. Final selection and installation should comply with the project specification, applicable UAE electrical regulations and the requirements of the relevant local authority, such as DEWA, ADDC or SEWA.

It can supply compatible household, office and light commercial equipment fitted with a BS 13A plug, provided the connected load remains within the socket and circuit ratings. Typical applications include televisions, computers, lamps and small appliances. High-load equipment must be checked against its nameplate current and the circuit design before connection.

Both outlets may be used simultaneously when the total demand is within the limits of the socket assembly, final circuit, protective device and installed cable. A qualified electrician should verify diversified and continuous loads rather than assuming that every connected appliance can draw its maximum current at the same time.

The socket is intended for flush installation with permanent wiring concealed behind the finished wall. Installation generally involves isolating and proving the circuit dead, confirming the compatible back box and cable arrangement, terminating live, neutral and earth conductors at the marked terminals, securing the accessory level and testing the completed circuit. Installation must be carried out by a qualified electrician in accordance with ABB instructions and local regulations.

Confirm the 13A and 250V AC electrical ratings, 2-gang configuration, dual BS 13A outlet type, double-pole switching requirement and flush-mounting arrangement. The installer should also check the stated dimensions of approximately 42 x 147 x 86 mm, back-box compatibility, wall depth, cable capacity, earthing provision and coordination with the selected ABB Millenium frame and other accessories.

Yes, it is suitable for residential, hospitality, office and premium interior fit-outs where a flush-mounted 2-gang socket and decorative antique gold finish are specified. Electrical consultants and contractors should include it in approved material submittals and coordinate its dimensions, finish, mounting box and circuit schedule before installation.

The supplied product information does not state an outdoor or ingress-protection rating. It should therefore be treated as an indoor accessory unless ABB documentation and the project specification confirm otherwise. Bathrooms, kitchens, balconies and external areas may require additional protection, suitable zoning, RCD protection and an appropriately IP-rated enclosure or outlet.

No, the antique gold finish is primarily an aesthetic feature intended to coordinate with premium interiors, decorative hardware and ABB Millenium accessories. Electrical performance depends on correct circuit design, secure cable termination, compatible mounting components and compliant installation.

The socket must be connected to a correctly designed final circuit with suitable cable sizing, earthing, overcurrent protection and any required residual-current protection. Protective device selection depends on the circuit arrangement, expected load and local authority requirements. A qualified electrician should perform continuity, polarity, insulation-resistance and functional tests before energising the circuit.

Keep the front surface clean with a soft, dry or lightly damp cloth and avoid abrasive cleaners or solvents that could damage the antique gold finish. Do not use the outlet if there is overheating, discoloration, looseness, arcing, a damaged switch or an unreliable LED. Isolate the circuit and arrange inspection by a qualified electrician if any defect is observed.

The ABB Millenium AM240147-AG combines a commonly used BS 13A outlet format with 13A, 250V AC ratings, double-pole isolation, LED indication and concealed flush mounting. Its antique gold finish makes it particularly relevant to villas, hotels, executive offices and high-end UAE fit-outs where electrical functionality and coordinated interior design are both important.