ABB Millenium 13A Double Pole Double Switched Socket with LED Black Glass AM240147-BG

This socket is rated at 13A and 250V AC and uses a dual BS 13A socket-outlet configuration. It features double-pole switching, an integrated LED indicator, secure fixed-wiring terminals and flush installation. The listed overall dimensions are 42 x 147 x 86 mm; installers should confirm the corresponding wall-box dimensions and mounting requirements before installation.

Double-pole switching disconnects both the live and neutral conductors when the socket is switched off. This provides more complete local isolation than a single-pole switch, although it does not replace circuit isolation at the distribution board before electrical installation, inspection or maintenance.

The product is described as a double switched, 2-gang socket, providing switched control for its dual 13A outlets. The exact switch-to-outlet arrangement should be checked against the ABB product diagram supplied with model AM240147-BG before wiring.

The integrated LED gives users a clear visual indication of the socket or connected-circuit operating status. This is useful in homes, hotel rooms, offices and commercial spaces where users need to identify an energised or switched-on outlet quickly.

Its 250V AC rating and BS-type 13A outlet format are compatible with the power and plug systems commonly used in the UAE. The final installation must comply with applicable UAE electrical regulations, the requirements of the relevant local authority and project specifications. A qualified electrician should also verify circuit protection, earthing and product conformity before energisation.

It is suitable for compatible BS 13A plug-connected equipment within the socket and circuit ratings, such as televisions, computers, chargers, lamps and many common household or office appliances. High-load equipment must be checked against its nameplate current, circuit capacity and project design; the 13A rating must not be exceeded.

Both outlets may be used simultaneously when the connected loads remain within the limits of the socket assembly, branch circuit, cable size and protective device. Contractors should calculate the expected combined load and account for any relevant derating or project-specific requirements rather than assuming each outlet can continuously carry its maximum rating at the same time.

The unit is designed for flush mounting with concealed fixed wiring. Installation generally involves isolating and verifying the circuit as dead, confirming the correct compatible wall box, preparing the conductors, connecting live, neutral and earth to the marked terminals, tightening terminals to ABB's specified torque, mounting the mechanism level and fitting the matching frame. Testing should be completed before handover by a qualified electrician.

A compatible flush wall box with adequate width, depth, fixing centres and cable-entry space is required. Because decorative wiring accessories can have product-specific mounting arrangements, contractors should compare the listed 42 x 147 x 86 mm dimensions with the ABB installation drawing and selected back box before wall cutting, blockwork preparation or fit-out.

The electrician should carry out the tests required by the applicable UAE authority and project specification, which may include protective-conductor continuity, insulation resistance, polarity, earth-fault protection and functional operation of both switches and the LED. The circuit protective device and earthing arrangement must also be confirmed before the socket is placed into service.

Yes. The concealed mounting, dual outlets, local switching and black glass finish make it suitable for villas, apartments, executive offices, hotels and premium retail fit-outs. MEP contractors should coordinate the wall box, finished-wall depth, cable route, circuit schedule and accessory location before plastering, tiling or decorative panel installation.

It should only be installed where the location, enclosure protection and applicable electrical rules permit. The supplied information does not state an IP rating, so it should not be assumed suitable for direct exposure to water, dust, weather or high humidity. Wet, outdoor and exposed locations require an appropriately rated accessory and installation method.

Switch off the circuit before maintenance and clean the face gently with a soft, dry or lightly damp microfiber cloth. Do not use abrasive pads, strong solvents or excessive water. Periodic electrical inspection should check for loose fittings, heat discolouration, damaged switches, cracked glass, unusual odours or intermittent LED operation.

The ABB Millenium AM240147-BG combines dual BS 13A socket outlets, double-pole isolation, LED status indication and concealed installation in a premium black glass design. It is a practical specification choice for UAE contractors and interior designers seeking coordinated electrical accessories for modern residential, hospitality and commercial projects.