ABB Millenium 13A Double Pole Double Switched Socket with LED Mocha Brown AM240147-MO

Double-pole switching disconnects both the live and neutral conductors when the socket is switched off. This provides more complete local isolation than single-pole switching, subject to correct wiring and circuit design. The protective earth conductor remains permanently connected and must never be switched.

Yes. Its 13A BS-style socket configuration and 250V AC rating are suitable for many UAE low-voltage installations using British-pattern plugs. The project designer or electrician must confirm compliance with the applicable UAE electrical regulations, local authority requirements and project specifications, including those issued by the relevant utility or municipality.

It can be used for compatible 13A plug-in equipment such as televisions, computers, chargers, lamps and selected household or office appliances. The connected load must remain within the socket rating, circuit capacity and manufacturer instructions. High-load equipment such as ovens, water heaters, large air-conditioning units or other fixed appliances may require a dedicated circuit and isolator instead.

Both outlets may be used simultaneously when the total demand is within the capacity of the socket assembly, final circuit, protective device and fixed wiring. A qualified electrician should assess simultaneous loads, cable sizing and circuit protection, especially where high-power appliances are involved.

The integrated LED provides a visible indication of the switch or connected-circuit status, depending on the product's terminal configuration. It helps users identify whether the outlet is switched on, particularly in dim rooms. The installer should follow the ABB wiring diagram to obtain the intended indication.

This model is designed for flush mounting, with the wiring and mounting box concealed behind the finished wall. Installation generally involves isolating and proving the circuit dead, confirming the back-box fit and cable capacity, terminating live, neutral and earth conductors at the marked terminals, securing the unit level and carrying out electrical tests before energisation. Installation should be completed by a qualified electrician in accordance with ABB instructions and applicable UAE requirements.

The stated product dimensions are approximately 42 x 147 x 86 mm, with a listed width of 147 mm. Before construction or fit-out work begins, verify the required back-box format, depth, fixing centres and wall-finish allowance against the current ABB technical drawing. Extra depth may be needed for cable bends and safe terminal clearance.

Yes. The flush-mounted design is suitable for villas, apartments, offices, hotels, retail premises and other indoor construction or refurbishment projects. Electrical contractors should coordinate the back boxes, conduit routes, outlet locations and final wall finishes before installation to avoid alignment problems or insufficient wiring space.

It may be installed in different wall systems when a compatible flush box and appropriate fixing method are used. Drywall requires a secure cavity box, while blockwork or concrete installations normally require the box and conduit to be coordinated during first-fix work. The box must remain level, firmly supported and correctly positioned relative to the finished wall surface.

Do not assume this standard flush socket is weatherproof or water-resistant because no IP rating is stated in the supplied specifications. In kitchens, bathrooms, balconies, gardens or other damp locations, outlet selection and positioning must follow the applicable zone, RCD or RCBO protection and ingress-protection requirements. Use a suitably rated weatherproof product where exposure to water, dust or humidity is expected.

Protection depends on the final-circuit design and applicable local regulations. The circuit must use correctly sized conductors, suitable overcurrent protection, effective earthing and any required residual-current protection. A qualified electrician should select and test the MCB, RCBO or RCD arrangement rather than relying only on the socket's 13A outlet rating.

The connector type is specified as a dual BS 13A socket outlet, intended for compatible British-pattern three-pin plugs commonly used in the UAE. Plug compatibility should still be checked before use. Avoid forcing incompatible plugs or using poor-quality travel adaptors, as these can cause loose contact, overheating or damage.

The electrician should inspect terminal tightness and conductor identification, verify protective-earth continuity and polarity, perform insulation-resistance and required protective-device tests, confirm secure mechanical mounting and test both switches and the LED indication. Results should be documented as required for the project handover and relevant UAE authority inspection.

Switch off and isolate the circuit before maintenance. Clean the faceplate with a soft, dry or lightly damp cloth and avoid abrasive pads, solvents or excessive water. Arrange inspection by a qualified electrician if the socket becomes hot, discoloured, cracked, loose, noisy or produces a burning smell; it should not remain in service until the fault is resolved.