ABB Millenium 13A Double Pole Double Switched Socket with LED Stainless Steel AM240147-ST

Key specifications include a 13A rated current, 250V AC rating, dual BS 13A socket configuration, double-pole switching, LED status indication and flush-mounted installation. Its listed overall dimensions are approximately 42 x 147 x 86 mm. The dimensions and mounting requirements should be checked against the selected back box and finished wall build-up before installation.

Double-pole switching disconnects both the live and neutral conductors when the socket is switched off. This provides more complete local isolation than single-pole switching, although the earth connection remains continuous. The switch must not be treated as the sole safe-isolation method during electrical work; the circuit should be isolated and verified at the distribution board.

Yes, its BS-style 13A outlet format and 250V AC rating are relevant to typical UAE low-voltage installations using British-type plugs. Final selection and installation must comply with the applicable requirements of the relevant UAE electricity authority, project specifications and recognised wiring practices such as BS 7671 where adopted. Approval requirements can vary between emirates and projects.

The integrated LED provides a visible indication of the switch or connected-circuit status, helping users identify whether the outlet is operating. The exact indication may depend on the product's internal configuration and wiring arrangement, so the ABB installation instructions should be followed.

It is suitable for compatible BS 13A plug-equipped appliances within the socket and circuit ratings, including televisions, computers, chargers, lamps and selected household or office equipment. The connected load must not exceed the outlet, plug, cable or protective-device rating. High-load appliances should be assessed by a qualified electrician, and fixed high-power equipment may require a dedicated circuit or connection unit.

Both outlets may be used simultaneously when the connected appliances, branch circuit, cable size and protective device are correctly coordinated. A double socket should not be assumed to provide an unrestricted 13A supply from each outlet continuously under every installation condition. The electrician should assess total demand, diversity and manufacturer guidance, particularly for sustained high-load equipment.

This model is intended for flush mounting, with the cable terminations and back box concealed behind the finished wall surface. Installation generally involves isolating and proving the circuit dead, confirming the correct back box and cable arrangement, terminating live, neutral and earth conductors at the marked terminals, securing the mechanism, fitting the matching frame and completing electrical tests. Installation should be carried out by a qualified electrician in accordance with ABB instructions and local regulations.

Use a compatible flush back box that accommodates the socket's mounting pattern, approximately 147 mm width and 42 mm listed depth, cable entries and conductor bend radius. Extra clearance may be needed for wiring and terminals. Confirm the exact ABB Millenium back-box and frame compatibility before wall cutting, blockwork chasing, drywall closure or final finishing.

Contractors should coordinate the outlet position with electrical drawings, furniture layouts, joinery and finished floor levels. The back box should be level, securely fixed and set to the correct finished-wall depth, with conduits aligned and protected from plaster, paint and debris. Adequate cable length should be retained for safe termination without overcrowding or damaging conductor insulation.

The electrician should perform the tests required by the project and applicable wiring regulations. These commonly include protective-conductor continuity, insulation resistance, polarity, earth-fault loop or protective-device verification, functional switching and LED operation. Test results should be documented as required for inspection, commissioning and handover.

Do not assume that the stainless steel finish makes the socket weatherproof or water-resistant. Unless ABB documentation confirms an appropriate IP rating, it should be used in suitable dry indoor locations. Installation in kitchens, bathrooms, wash areas, balconies or outdoors requires compliance with location-specific rules, suitable ingress protection and any required RCD protection.

RCD or RCBO protection may be required depending on the circuit, location, intended use and regulations of the relevant UAE authority or project consultant. The socket itself does not replace circuit protection. A qualified electrician should coordinate it with the correct cable size, earthing arrangement, overcurrent device and residual-current protection.

Isolate the electrical supply before maintenance and wipe the faceplate with a soft, slightly damp cloth. Avoid abrasive pads, harsh chemicals, solvents and excessive moisture, as these can damage the finish or enter the mechanism. The terminals and mounting security should be inspected by a qualified electrician if there is heat discoloration, looseness, crackling, intermittent operation or a burning smell.

The AM240147-ST combines dual BS 13A outlets, local switching, double-pole isolation, LED status indication, concealed wiring and a stainless steel architectural finish. These features make it relevant for residential, commercial, hospitality and fit-out projects seeking coordinated wiring accessories with a clean finished appearance. Designers should verify compatibility with the specified ABB Millenium frame, back box and project approval schedule.