ABB Millenium 13A Double Pole Single Switched Socket Antique Gold AM23786-AG

Key specifications include a 13A rated current, 250V AC rated voltage, 1-gang outlet configuration, double-pole switching, BS 13A socket connection and flush-mounted installation. The overall dimensions are approximately 86 x 86 mm, with a stated depth of 35 mm. The model number is AM23786-AG.

Double-pole switching means that operating the socket switch disconnects both the live and neutral conductors simultaneously. This provides more complete local isolation than a single-pole switch, which normally interrupts only the live conductor. The protective earth remains permanently connected and must never be switched.

Yes, its BS 13A outlet format is relevant to the UAE market, where Type G plugs and 230V, 50Hz electrical supplies are commonly used. Its 250V AC rating is suitable for correctly designed UAE low-voltage installations. Product approval, circuit protection and installation must still satisfy the applicable local authority requirements and project specifications.

It is intended for compatible Type G or BS 13A fused plugs used with appliances whose operating current and power demand remain within the socket, plug, circuit and manufacturer limits. Typical applications include televisions, computers, lamps and many household or office appliances. High-load equipment should be checked by a qualified electrician, and permanently connected equipment may require a dedicated circuit or connection unit.

The socket is designed for flush mounting into a compatible concealed wall box. Installation generally involves isolating and proving the circuit dead, confirming the conductors, terminating live, neutral and earth in their marked terminals, securing the mechanism without trapping cables, fitting the matching frame and completing electrical tests before energisation. Installation should be performed by a qualified electrician in accordance with ABB instructions, approved drawings and UAE authority requirements.

The face dimensions are approximately 86 x 86 mm and the stated product depth is 35 mm. A compatible flush box with sufficient internal depth is required to accommodate the mechanism, conductor bends and secure terminations without compression. The installer should verify the exact ABB mounting system, frame compatibility, fixing centres and required back-box depth before wall finishing or bulk procurement.

Yes, it can be used in common UAE construction systems when an appropriate flush box and conduit arrangement are provided. Concrete and block walls normally require a securely recessed box coordinated before plastering or finishing, while drywall partitions require a suitable cavity box fixed to the board or framing system. The finished box must be level, stable and positioned so the socket plate sits evenly against the wall.

Cable size and protective-device rating cannot be selected from the socket rating alone. They depend on the circuit design, installation method, ambient temperature, grouping, route length, voltage drop, prospective fault current and local regulations. A qualified electrical engineer or electrician should select the conductors, MCB or RCBO, RCD protection and earthing arrangement for the specific UAE project.

No. The 13A marking is the documented current rating of the outlet, not a guarantee that every connected appliance or branch circuit can continuously operate at that load. Actual capacity is governed by the appliance, fused plug, wiring, protective device, ambient conditions and circuit design. Avoid overloading the outlet or using adaptors that permit excessive combined loads.

Yes. The antique gold finish is well suited to villas, apartments, hotels, restaurants, executive offices and premium retail interiors where electrical accessories form part of the design scheme. Contractors should approve a physical sample and coordinate the socket with matching ABB Millenium frames, switches, wall finishes and other metalwork to maintain a consistent appearance.

It should only be installed where the environmental conditions and required ingress protection are appropriate for the product. Do not assume that a decorative flush socket is weatherproof or splash-proof unless ABB documentation confirms an applicable IP rating. Wet areas, outdoor locations and exposed service zones may require a suitably rated enclosure, protected accessory, correct zoning and additional RCD protection.

Before handover, the electrician should perform the tests required by the project and relevant UAE authority, which may include protective-conductor continuity, insulation resistance, polarity, earth-fault loop or disconnection verification, RCD or RCBO operation and functional testing of the double-pole switch. Results should be recorded as part of the installation inspection and commissioning documentation.

Isolate the circuit before inspection or maintenance. Clean the visible surface with a soft, dry or lightly damp cloth and avoid abrasive pads, harsh chemicals and solvent-based cleaners that could damage the antique gold finish. Arrange professional inspection if the socket becomes hot, loose, discoloured, cracked, noisy or intermittent, or if plugs no longer fit securely.

Confirm the model number AM23786-AG, 13A and 250V AC ratings, 1-gang configuration, double-pole switching, BS 13A plug compatibility, 86 x 86 mm face size and flush-mounting requirements. Also verify the matching ABB Millenium frame, back box, finish sample, project specification, authority approval requirements and required quantities before procurement.