ABB Millenium 13A Double Pole Single Switched Socket Black Glass AM23786-BG

Double-pole switching disconnects both the live and neutral conductors when the socket is switched off. This provides more complete local isolation than a single-pole switch, provided the socket is correctly wired and installed. The circuit must still be isolated at the distribution board before inspection, maintenance or electrical work.

Yes. Its 250V AC rating and BS 13A socket configuration are compatible with the supply voltage and Type G plug format commonly used in the UAE. Installation must comply with applicable UAE electrical regulations, the project specification and the requirements of the relevant local authority, such as DEWA, ADDC or the authority serving the project location.

It can supply compatible BS 13A plug-in equipment whose current demand does not exceed the socket rating or the designed circuit capacity. Typical applications include televisions, computers, lamps, small office equipment and suitable household appliances. High-load equipment must be checked against its nameplate current, plug rating, cable size and circuit protection before connection.

The documented overall dimensions are approximately 35 x 86 x 86 mm, with an 86 mm face width. Installers should verify the wall box depth, cable space, terminal clearance and compatibility with the selected ABB Millenium frame or accessory arrangement before completing blockwork, drywall or joinery openings.

The socket is designed for flush mounting, with the fixed wiring and mounting box concealed behind the finished wall. Installation generally involves isolating and proving the circuit dead, preparing a compatible flush box, terminating live, neutral and earth conductors at the identified terminals, securing the mechanism, fitting the matching frame and testing the completed outlet. Installation should be carried out by a qualified electrician in accordance with ABB instructions and local regulations.

A qualified electrician should verify conductor identification, terminal tightness, protective-earth continuity, polarity, insulation resistance and operation of the double-pole switch. The electrician should also confirm that the cable size, circuit breaker or RCBO, earthing arrangement and any required residual-current protection comply with the approved electrical design and applicable UAE authority requirements.

Yes, it can be incorporated into concrete, masonry or drywall installations when a compatible flush box and suitable fixing method are specified. On construction projects, the electrical contractor should coordinate box position and depth with plaster, tile, stone, glass or wall-panel finishes so that the socket sits level and the frame is not stressed or left recessed.

Use it only where the environmental conditions and project design are suitable. No specific IP or weather-resistance rating is provided in the listed product data, so it should not be assumed suitable for exposed outdoor, wet or splash-prone locations. Kitchens, bathrooms, balconies and service areas may require appropriately rated accessories, RCD protection and installation within permitted electrical zones.

The black glass appearance suits contemporary villas, apartments, hotels, offices and premium retail interiors. It coordinates well with dark joinery, stone surfaces and modern decorative schemes while keeping fixed wiring concealed through flush mounting. The face should be protected from impact, abrasive cleaning products and construction debris during installation and fit-out.

Yes. The socket incorporates terminals intended for secure fixed-wiring connections when conductors are correctly prepared and tightened to the manufacturer's requirements. Cable type, conductor size, stripping length and terminal torque should be confirmed from ABB installation documentation rather than estimated on site.

Contractors should confirm the model number AM23786-BG, one-gang BS 13A outlet format, 13A current rating, 250V AC voltage rating, double-pole switching, black glass finish, flush-mounting requirement and approximate 35 x 86 x 86 mm dimensions. They should also verify frame and back-box compatibility, required quantities, circuit design, installation location and compliance with consultant-approved material submittals.

Switch off the socket before cleaning and use a soft, dry or lightly dampened cloth on the face. Do not use abrasive pads, aggressive chemicals or excessive water. If the socket becomes loose, cracked, discoloured, unusually warm or produces intermittent power, stop using it and have the circuit inspected by a qualified electrician.