ABB Millenium 13A Double Pole Switched Socket with LED Matt Gold AM23886-MG

Double-pole switching means that the switch disconnects both the live and neutral conductors at the same time. This provides more complete local isolation than a single-pole socket, subject to correct wiring and circuit design. The protective earth connection remains continuous and must not be switched.

The socket is rated at 250V AC and uses a BS 13A socket configuration, making it relevant to the 230V, 50Hz supply and British-style 13A plugs commonly used in the UAE. Final selection and installation must comply with the applicable UAE electrical regulations, project specifications and requirements of the relevant local authority.

This model is a one-gang socket outlet intended for one BS 13A plug. The term double pole describes the switching of both live and neutral; it does not mean that the product has two plug outlets.

The integrated LED provides a convenient visual indication of the socket or switch status. This is useful in bedrooms, kitchens, offices, hotel rooms and facilities-management applications where users need to identify whether the outlet is switched on. The exact indication depends on the manufacturer's terminal configuration and correct installation.

It can supply compatible appliances fitted with a BS-style fused 13A plug, provided the connected load does not exceed the socket rating or the capacity of the circuit. Typical applications include televisions, computers, lamps and small household or office appliances. High-load equipment must be checked against its nameplate current, starting current and manufacturer instructions before connection.

Do not select the socket solely because it carries a 13A rating. Air conditioners, water heaters, pumps and similar construction-services equipment may require a dedicated circuit, suitable protective device, local isolator or fused connection unit. A qualified electrical engineer or electrician should confirm the equipment load, cable size, starting current and UAE project requirements.

The unit is designed for flush mounting with concealed fixed wiring. Installation generally involves isolating and proving the circuit dead, confirming the mounting box and cable arrangement, terminating live, neutral and earth conductors at the marked terminals, securing the mechanism without trapping cables, fitting the matching frame and completing electrical tests before energising. Installation should only be performed by a qualified electrician.

The listed product dimensions are approximately 35 x 86 x 86 mm. Before wall finishing, the contractor should verify that the selected concealed box, screw centres, internal depth and cable-entry positions are compatible with the ABB Millenium mechanism and frame. Additional space may be needed for safe conductor bending and termination, particularly with larger cables or multiple conductors.

The electrician should perform the tests required by the applicable installation rules and project specifications. These may include protective-conductor continuity, polarity, insulation resistance, earth-fault loop or protective-device verification, RCD operation where applicable, terminal security and functional checks of the double-pole switch and LED indicator.

No weatherproof or ingress-protection rating is stated in the supplied product data, so it should be treated as an indoor flush-mounted accessory for dry locations unless ABB documentation confirms otherwise. Bathrooms, balconies, gardens, wash areas and other damp or exposed locations require correctly rated accessories, suitable zoning and appropriate RCD protection under applicable UAE requirements.

The matt gold finish is suited to premium villas, apartments, hotels, executive offices, retail interiors and hospitality fit-outs where electrical accessories must coordinate with warm metallic hardware, lighting trims or interior finishes. Contractors should confirm the approved finish sample and matching ABB Millenium frame before bulk procurement.

The product information states that a matching frame completes the installed finish. Contractors should nevertheless verify the exact package contents and frame compatibility before ordering, especially for project quantities, because mechanisms, frames and mounting accessories may be supplied or scheduled separately depending on the configuration.

Keep the faceplate dry and clean it with a soft cloth; avoid abrasive products, solvents and excessive moisture that could damage the matt gold finish. Periodically inspect for heat discolouration, looseness, cracking, unusual LED behaviour or plug damage. If any defect is found, isolate the circuit and have the socket checked by a qualified electrician rather than opening it while energised.