ABB Millenium 13A Single Pole Switched Socket Antique Gold AM23386-AG

This switched socket has a rated current of 13A, a rated voltage of 250V AC, a BS 13A socket-outlet configuration and single-pole switching. It is designed for concealed flush mounting and measures approximately 86 x 86 mm across the face, with a listed overall depth of 35 mm. Secure terminals support dependable fixed-wiring connections when installed correctly.

Yes. The BS 13A socket format is widely used in UAE residential and commercial buildings and is compatible with standard UK-style 13A plugs commonly found in the country. The installation must still comply with the applicable UAE electrical regulations, project specifications and requirements of the relevant local authority, such as DEWA, ADDC or the authority serving the project location.

Single-pole switching means the socket switch disconnects the live conductor to provide convenient local control of the connected appliance. It does not switch both live and neutral conductors. The circuit should therefore be safely isolated at the distribution board before installation, inspection or maintenance.

It is suitable for dry indoor locations such as villas, apartments, offices, hotels, retail spaces, meeting rooms and premium fit-out projects. Typical applications include powering televisions, computers, lamps and compatible domestic or office appliances, provided the connected load remains within the socket and circuit ratings.

This product should be treated as a standard indoor flush-mounted socket unless project documentation confirms a specific ingress-protection rating. In kitchens, bathrooms, utility areas, balconies or outdoor locations, socket placement and protection must comply with the relevant electrical zones and local regulations. Where moisture, dust or weather exposure is possible, use an appropriately rated weatherproof or IP-rated accessory instead.

Installation involves isolating and verifying the circuit as de-energised, fitting a compatible concealed wall box, terminating the live, neutral and protective earth conductors at the marked terminals, securing the mechanism, and attaching the matching frame or cover. The conductors must be correctly sized for the circuit, terminals tightened to the manufacturer's requirements, and cables arranged without excessive bending or insulation damage. Installation and testing should be completed by a qualified electrician.

The socket requires a compatible 1-gang concealed back box and a prepared wall opening suitable for the 86 x 86 mm face dimensions and the listed 35 mm product depth. The selected box should provide sufficient clearance for terminals, conductor bends and cable entries. Contractors should verify ABB mounting compatibility, screw centres and required box depth before completing blockwork, gypsum partitions, tiling or decorative finishes.

Yes, it can be incorporated into masonry or gypsum-board construction when the correct flush box and fixing method are used. Masonry installations normally require a securely embedded metal or PVC box, while drywall installations require a suitable cavity box or support system. The box must remain level, rigid and aligned with the final finished wall surface.

The socket must be connected to a properly designed final circuit with suitable overcurrent protection, earthing and, where required by UAE regulations or the application, residual-current protection. Protective-device ratings, cable sizes and circuit arrangements must be determined from the approved electrical design rather than from the 13A socket rating alone. Testing should include polarity, earth continuity, insulation resistance and operation of applicable protective devices.

It may supply compatible plug-in equipment that does not exceed the socket rating, circuit capacity or appliance manufacturer's requirements. High-load or fixed appliances such as cookers, water heaters and large air-conditioning equipment may require dedicated circuits, double-pole isolators or specialised connection units. A qualified electrical engineer or electrician should confirm load suitability before connection.

The product information indicates that a matching frame completes the installed finish, but package contents should be confirmed before ordering because mechanisms, frames and mounting accessories may be supplied separately in some modular wiring-accessory ranges. For multi-unit construction projects, verify the required quantities of socket mechanisms, antique gold frames and compatible back boxes against the approved material schedule.

Confirm the approved outlet layout, mounting heights, circuit references and finish schedule before first-fix work. Install compatible back boxes level with the intended finished surface and protect them during plastering, painting, tiling or joinery work. During second fix, terminate the wiring, fit the ABB Millenium antique gold accessory, test the circuit and record the results in the project's inspection and commissioning documentation.

Isolate the circuit if cleaning near the socket openings, then wipe the faceplate gently with a soft, dry or slightly damp cloth. Do not use abrasive pads, harsh chemicals, solvents or excessive water, as these may damage the decorative antique gold surface. During construction, protect the accessory from paint, cement dust, grout and metal tools, and remove temporary protection only after dusty works are complete.

This ABB Millenium 13A single switched socket combines a widely used BS 13A outlet format, convenient local switching, concealed wiring and a premium antique gold appearance. It is especially relevant to UAE villas, hotels, executive offices and high-end fit-outs where electrical functionality must coordinate with brass, bronze or warm metallic interior finishes.