ABB Millenium 13A Single Pole Switched Socket Mocha Brown AM23386-MO

The socket is rated at 13A and 250V AC. The connected appliance and total circuit demand must remain within the socket rating and the capacity of the relevant cable, protective device and final circuit. Circuit design and loading should always be checked by a qualified electrician.

Single-pole switching means the integrated switch disconnects the live conductor while the neutral remains connected. Correct identification and termination of live, neutral and earth conductors are therefore essential. The circuit must be isolated at the distribution board before installation, inspection or maintenance.

Yes, its 13A, 250V AC and BS-style outlet format is relevant to residential, commercial and hospitality projects in the UAE, where Type G plugs are widely used. The complete installation must comply with the applicable UAE electrical regulations, project specifications and requirements of the relevant local authority or utility.

It is suitable for indoor fixed-wiring applications such as villas, apartments, offices, hotels, retail interiors and other completed building spaces. Typical uses include supplying compatible household, office and light commercial appliances that do not exceed the socket or circuit rating.

Only equipment whose operating current, starting current and plug configuration are compatible with a 13A outlet should be connected. Heavy-duty tools, welders, large compressors and other high-load construction equipment may require dedicated industrial sockets and separately designed circuits. An electrical engineer or qualified electrician should confirm the load requirements.

The unit is designed for flush mounting in a compatible concealed wall box. After the supply is isolated and verified dead, a qualified electrician should confirm conductor identification, prepare the cables without damaging them, connect live, neutral and earth to the marked terminals, tighten each terminal to the manufacturer's requirements, fit the mechanism and matching frame, and test the completed circuit before energising it.

The listed overall dimensions are approximately 35 x 86 x 86 mm. The selected wall box must provide sufficient depth for the mechanism, cable bend radius and safe terminal clearance without trapping or sharply bending conductors. Site conditions, conductor size and the exact ABB frame and box combination should be checked before wall finishing begins.

Yes. The protective earth conductor must be correctly terminated and the continuity of the earthing system must be tested as part of commissioning. Earthing, circuit protection and any required residual-current protection should comply with the approved project design and applicable UAE authority requirements.

Cable size and protective-device selection depend on the circuit arrangement, installation method, ambient temperature, grouping, route length and expected load. UAE heat and concealed installation conditions can affect cable capacity, so selection should be based on the approved electrical design rather than the socket's 13A rating alone.

It should not be assumed to be weatherproof or suitable for wet areas because no IP rating is stated in the supplied product information. Bathrooms, external walls, gardens and exposed construction areas require accessories with an appropriate IP rating, suitable zoning and compliant protective measures.

The electrician should inspect terminal security and conductor identification, then perform the tests required for the circuit, including protective-conductor continuity, insulation resistance, polarity and functional switch operation. Earth-fault loop and RCD tests should also be completed where applicable before the outlet is placed into service.

No. Mocha brown is the decorative finish and does not change the stated 13A, 250V AC electrical rating. It is intended to coordinate with suitable ABB Millenium frames and interior finishes. Confirm the frame, mechanism and any associated accessories are from compatible ranges before ordering for a project.

Keep the faceplate dry and clean it only with a soft cloth; avoid abrasive cleaners, solvents and excess moisture. Stop using the outlet if it becomes hot, discoloured, cracked, loose or produces arcing sounds. Any internal inspection, terminal tightening or replacement must be performed with the circuit safely isolated by a qualified electrician.