ABB Millenium 13A Single Pole Switched Socket with LED Antique Gold AM23486-AG

This model is rated at 13A and 250V AC and uses a BS-type 13A socket outlet configuration. It has a single-pole switch that controls the live conductor, an LED indicator, secure fixed-wiring terminals and a flush-mounted design. The stated overall dimensions are 35 x 86 x 86 mm.

Yes. Its 13A, 250V AC configuration is suited to the voltage and British-style plug system commonly used in UAE buildings. The complete installation must follow the applicable UAE electrical regulations, project specifications and requirements of the relevant local authority, such as DEWA, ADDC or another emirate-level utility. Confirm project approvals and product certification before specifying it for regulated works.

Single-pole switching means the socket switch disconnects the live conductor while the neutral remains connected. This provides convenient local control of the connected appliance. It does not isolate every circuit conductor, so the upstream circuit must be safely isolated before inspection, maintenance or wiring work.

The integrated LED provides a visible indication of the socket or connected-circuit operating status. This is useful in bedrooms, offices, hotel rooms and other locations where users need to identify whether the outlet is switched on. The exact indication behaviour should be confirmed from the ABB wiring instructions supplied with the unit.

It is intended for compatible BS-type fused plugs and appliances operating within the socket's 13A and 250V AC ratings. Typical applications can include televisions, computers, chargers, lamps and suitable domestic or office equipment. The actual load must be checked from the appliance nameplate, and high-demand equipment must not exceed the socket, plug, cable or circuit rating.

Only connect equipment when its running current, starting characteristics and manufacturer requirements are compatible with a 13A socket circuit. Many fixed air conditioners, water heaters and other heavy loads require a dedicated circuit, isolator or connection unit rather than a standard socket outlet. A qualified electrical professional should assess the load and UAE project requirements.

The socket is designed for flush installation, with the wiring and mounting box concealed behind the finished wall. Installation generally involves isolating and proving the circuit dead, checking the back-box size and depth, terminating live, neutral and earth conductors at the marked terminals, securing the mechanism without trapping cables, fitting the matching frame and performing the required electrical tests. Installation should be completed by a qualified electrician in accordance with ABB instructions and applicable UAE regulations.

Use a compatible flush back box that accommodates the 86 x 86 mm faceplate, the socket mechanism and the stated 35 mm product depth, while leaving adequate room for conductor bends and terminal connections. Confirm ABB mounting compatibility before first-fix work. The box should be level, securely fixed and positioned so the finished wall surface does not obstruct correct frame seating.

Cable conductor size cannot be selected from the socket rating alone. It must be determined from the circuit design, protective device, installation method, ambient temperature, grouping, voltage drop, fault protection and applicable UAE electrical regulations. Terminal capacity must also be checked in ABB's technical documentation. Cable selection and termination should be handled by a qualified electrician or electrical engineer.

Yes. Its 13A rating, local switch, LED indication and decorative Antique Gold finish make it suitable for selected villas, apartments, hotel rooms, executive offices, reception areas and premium commercial interiors. Contractors should verify the electrical schedule, finish schedule, mounting accessories and consultant approvals before procurement.

This product information does not state a weatherproof or ingress-protection rating. It should therefore be treated as an indoor accessory for appropriate dry locations unless ABB documentation confirms otherwise. Installation near water, in bathrooms, kitchens, balconies or outdoor areas must comply with the required electrical zones, RCD protection and local regulations; use a suitably IP-rated accessory where exposure to moisture, dust or weather is possible.

No. Its single-pole switch controls only the live conductor and should not be treated as a complete means of electrical isolation. Before maintenance or removal, isolate the circuit at the correct distribution-board protective device, lock off where required and verify that the circuit is dead using approved test equipment.

After installation, the electrician should check terminal tightness, conductor identification, earth continuity, polarity, insulation resistance, protective-device coordination and correct switch and LED operation. The faceplate should sit evenly against the finished wall without cable strain or exposed conductors. Testing and documentation should follow the approved project method statement and applicable UAE authority requirements.

Isolate the circuit before cleaning and wipe the visible surface with a soft, dry or lightly damp cloth. Do not use abrasive pads, strong solvents, acidic cleaners or excessive water, as these may damage the decorative finish or enter the electrical mechanism. Loose fittings, heat marks, unusual odours or intermittent operation should be inspected promptly by a qualified electrician.